[fpga] By elphel: put TIG on data bus after making sure no module uses it first cycle of the 2-cycle window.
elphel committed changes to the Elphel project fpga CVS:
put TIG on data bus after making sure no module uses it first cycle of the 2-cycle window.
put TIG on data bus after making sure no module uses it first cycle of the 2-cycle window.
- Modified x333.ucf rev1.2 - added one line, removed one line
[fpga] By elphel: added support for the debug mode simulation
elphel committed changes to the Elphel project fpga CVS:
added support for the debug mode simulation
added support for the debug mode simulation
- Modified x333t.tf rev1.4 - added 7 lines, removed 2 lines
- Modified x333t_parameters.tf rev1.3 - added 43 lines, removed 39 lines
- Modified x333t_tasks.tf rev1.4 - added 15 lines, removed 2 lines
[fpga] By elphel: moved table address write strobe so no data will be used in the first of the 2-cycles long valid window to be able to ease data bus timing
elphel committed changes to the Elphel project fpga CVS:
moved table address write strobe so no data will be used in the first of the 2-cycles long valid window to be able to ease data bus timing
moved table address write strobe so no data will be used in the first of the 2-cycles long valid window to be able to ease data bus timing
- Modified token_encode.v rev1.3 - added 6 lines, removed 3 lines
[fpga] By elphel: moved PIO data read strobe so no data will be used in the first of the 2-cycles long valid window to be able to ease data bus timing
elphel committed changes to the Elphel project fpga CVS:
moved PIO data read strobe so no data will be used in the first of the 2-cycles long valid window to be able to ease data bus timing
moved PIO data read strobe so no data will be used in the first of the 2-cycles long valid window to be able to ease data bus timing
- Modified sdram_phase.v rev1.2 - added 6 lines, removed 28 lines
[fpga] By elphel: moved table address write strobe so mno data will be used in the first of the 2-cycles long valid window to be able to ease data bus timing
elphel committed changes to the Elphel project fpga CVS:
moved table address write strobe so mno data will be used in the first of the 2-cycles long valid window to be able to ease data bus timing
moved table address write strobe so mno data will be used in the first of the 2-cycles long valid window to be able to ease data bus timing
- Modified qdeq.v rev1.6 - added 6 lines, removed 6 lines
[fpga] By elphel: added debug mode
elphel committed changes to the Elphel project fpga CVS:
added debug mode
added debug mode
- Modified mcontr_tok_wr.v rev1.5 - added 13 lines, removed none
[fpga] By elphel: moved strobes that use PIO data 1 cycle behind to easy timing on data bus
elphel committed changes to the Elphel project fpga CVS:
moved strobes that use PIO data 1 cycle behind to easy timing on data bus
moved strobes that use PIO data 1 cycle behind to easy timing on data bus
- Modified mcontr_cmd.v rev1.4 - added 6 lines, removed 11 lines
[fpga] By elphel: added debug mode
elphel committed changes to the Elphel project fpga CVS:
added debug mode
added debug mode
- Modified mcontr_8chn.v rev1.7 - added 23 lines, removed 7 lines
[fpga] By elphel: added shift registers to read debug data out
elphel committed changes to the Elphel project fpga CVS:
added shift registers to read debug data out
added shift registers to read debug data out
- Modified macros333.v rev1.3 - added 64 lines, removed 38 lines
[fpga] By elphel: added signals for debugging purposes, cleaned up some code
elphel committed changes to the Elphel project fpga CVS:
added signals for debugging purposes, cleaned up some code
added signals for debugging purposes, cleaned up some code
- Modified ioports333t.v rev1.3 - added 34 lines, removed 189 lines
[fpga] By elphel: added debug mode
elphel committed changes to the Elphel project fpga CVS:
added debug mode
added debug mode
- Modified defines333.vh rev1.3 - added one line, removed none
[fpga] By elphel: moved table address write strobe
elphel committed changes to the Elphel project fpga CVS:
moved table address write strobe
moved table address write strobe
- Modified compressor_two.v rev1.6 - added 6 lines, removed 4 lines
[fpga] By elphel: added debug signals
elphel committed changes to the Elphel project fpga CVS:
added debug signals
added debug signals
- Modified compressor_all.v rev1.6 - added 18 lines, removed none
[fpga] By elphel: moved table address strobe 1 cycle...
elphel committed changes to the Elphel project fpga CVS:
moved table address strobe 1 cycle added debug signals
moved table address strobe 1 cycle added debug signals
- Modified compressor_one.v rev1.6 - added 16 lines, removed 2 lines
[fpga] By elphel: comments updated
elphel committed changes to the Elphel project fpga CVS:
comments updated
comments updated
- Modified channel3.v rev1.3 - added one line, removed one line
[fpga] By elphel: not used anymore
elphel committed changes to the Elphel project fpga CVS:
not used anymore
not used anymore
- Modified dma_cntrl333.v rev1.2 - added none, removed none
[fpga] By elphel: fixed bug (signal between different clock domains) and added new status bit for troubleshooting
elphel committed changes to the Elphel project fpga CVS:
fixed bug (signal between different clock domains) and added new status bit for troubleshooting
fixed bug (signal between different clock domains) and added new status bit for troubleshooting
- Modified mcontr_8chn.v rev1.6 - added 40 lines, removed 2 lines
- Modified x333.v rev1.7 - added 6 lines, removed 3 lines
[fpga] By elphel: restored lost status bit that indicates that refresh is running - a way to find out that SDRAM is initialized
elphel committed changes to the Elphel project fpga CVS:
restored lost status bit that indicates that refresh is running - a way to find out that SDRAM is initialized
restored lost status bit that indicates that refresh is running - a way to find out that SDRAM is initialized
- Modified mcontr_8chn.v rev1.5 - added 5 lines, removed 3 lines
- Modified x333.v rev1.6 - added 46 lines, removed 44 lines
[fpga] By elphel: simulation bug fix
elphel committed changes to the Elphel project fpga CVS:
simulation bug fix
simulation bug fix
- Modified compressor_two.v rev1.5 - added one line, removed one line
[fpga] By elphel: chip pinout on the model 333 PCB and timimng constraints
elphel committed changes to the Elphel project fpga CVS:
chip pinout on the model 333 PCB and timimng constraints
chip pinout on the model 333 PCB and timimng constraints
- Modified x333.ucf rev1.1 - added none, removed none
Pages
