Andrey.filippov uploaded File:10386.pdf

New page

== Licensing ==
{{CERN OHLv1.1 }} Andrey.filippov

Andrey.filippov uploaded File:10386 gerber.tar.gz

New page

== Licensing ==
{{CERN OHLv1.1 }} Andrey.filippov

Andrey.filippov uploaded File:10386 assy.tar.gz

New page

== Licensing ==
{{CERN OHLv1.1 }} Andrey.filippov

← Older revision Revision as of 01:16, 11 March 2018 Line 1: Line 1:  ==10338D, 10338E== ==10338D, 10338E==  [[Image:10338d.jpeg|frame|[[Media:10338d.jpeg|10338 board, rev D and E]]]] [[Image:10338d.jpeg|frame|[[Media:10338d.jpeg|10338 board, rev D and E]]]] −[[Image:10338bd.png|frame|[[Media:10338d.pdf|10338 rev D Circuit Diagram, PCB layout]] <br/>+[[Image:10338bd.png|frame|  +[[Media:10338d.pdf|10338 rev D circuit diagram, PCB layout]] <br/>  [[Media:10338d_gerber.tar.gz|10338 rev D Gerber files]] <br/> [[Media:10338d_gerber.tar.gz|10338 rev D Gerber files]] <br/> −[[Media:10338e.pdf|10338 rev E Circuit Diagram, PCB layout]] <br/>+[[Media:10338e.pdf|10338 rev E circuit diagram, PCB layout]] <br/>  [[Media:10338e_gerber.tar.gz|10338 rev E Gerber files]] <br/> [[Media:10338e_gerber.tar.gz|10338 rev E Gerber files]] <br/> −[[Media:10338e_assy.tar.gz|10338 rev E component placement files]]+[[Media:10338e_assy.tar.gz|10338 rev E components placement files]]  ]] ]]  10338D/10338E is a modification of the earlier [[10338]] board designed to interface Aptina (before Micron) MT9P031/MT9P001/MT9P006 5MPix (2592x1944) sensor  to [[353|Elphel Model 353 Cameras]]. This board has smaller physical size (15mm x 28mm) to fit in multisensor panoramic setups. 10338D/10338E is a modification of the earlier [[10338]] board designed to interface Aptina (before Micron) MT9P031/MT9P001/MT9P006 5MPix (2592x1944) sensor  to [[353|Elphel Model 353 Cameras]]. This board has smaller physical size (15mm x 28mm) to fit in multisensor panoramic setups. Andrey.filippov

‎More details

← Older revision Revision as of 01:15, 11 March 2018 (One intermediate revision by the same user not shown)Line 78: Line 78:     ==More details== ==More details== −[[Image:10393_bd.png|thumb|400px|[[Media:10393b.pdf|10393 Rev "B" Circuit Diagram, Parts List, PCB layout]]&nbsp;&nbsp;&nbsp;&nbsp; [[Media:10393b_gerber.tar.gz|10393 rev "B" Gerber files]]]]+[[Image:10393_bd.png|thumb|400px|  +[[Media:10393b.pdf|10393 rev B  circuit diagram, parts list, PCB layout]] <br/>  +[[Media:10393b_gerber.tar.gz|10393 rev B  Gerber files]] <br/>  +[[Media:10393b_assy.tar.gz|10393 rev B components placement files]] <br/>  +[[Media:10393c.pdf|10393 rev C  circuit diagram, parts list, PCB layout]] <br/>  +[[Media:10393c_gerber.tar.gz|10393 rev C  Gerber files]] <br/>  +[[Media:10393c_assy.tar.gz|10393 rev C components placement files]]  +]]  This camera system board is designed to simultaneously support multiple sensors - both with legacy parallel interface (it is directly compatible with [[10338|10338 Sensor board]] and [[10359|10359 Sensor multiplexer board]]) and with new high-speed serial interface (up to 8 lanes + clock per each port), such as [[10398 | 10398 14MPix SFE]]. Sensor ports of the 10393 can be combined to interface larger/higher speed sensors, interface supply voltage is programmable in the range of 1.35V to 2.8V. All the sensor port interface signals are routed directly to the FPGA pads (22 I/O signals on each of the 4 flex cable connectors) , so the same ports can be uses for other purposes, for example to control the motors or interface IMU of the quadcopter. This camera system board is designed to simultaneously support multiple sensors - both with legacy parallel interface (it is directly compatible with [[10338|10338 Sensor board]] and [[10359|10359 Sensor multiplexer board]]) and with new high-speed serial interface (up to 8 lanes + clock per each port), such as [[10398 | 10398 14MPix SFE]]. Sensor ports of the 10393 can be combined to interface larger/higher speed sensors, interface supply voltage is programmable in the range of 1.35V to 2.8V. All the sensor port interface signals are routed directly to the FPGA pads (22 I/O signals on each of the 4 flex cable connectors) , so the same ports can be uses for other purposes, for example to control the motors or interface IMU of the quadcopter.    Andrey.filippov

Andrey.filippov uploaded File:10393b assy.tar.gz

New page

== Licensing ==
{{CERN OHLv1.1 }} Andrey.filippov

Andrey.filippov uploaded File:10393c gerber.tar.gz

New page

== Licensing ==
{{CERN OHLv1.1 }} Andrey.filippov

Andrey.filippov uploaded File:10393c assy.tar.gz

New page

== Licensing ==
{{CERN OHLv1.1 }} Andrey.filippov

Andrey.filippov uploaded File:10393c.pdf

New page

== Licensing ==
{{CERN OHLv1.1 }} Andrey.filippov

← Older revision Revision as of 01:05, 11 March 2018 Line 11: Line 11:  10398 SFE uses the same 30-pin flex cable connector for control (I²C, extra GPIO), differential data output (4-lane HiSPi+clock) and 3.3V power (additional 2.8V analog and 1.8V digital are generated on board). Short connections can use general purpose flex jumpers (30 conductors, 0.5mm pitch) or Elphel flex cables manufactured for the parallel interface sensors, longer connections require controlled-impedance flex cables with 100Ω differential lines. 10398 SFE uses the same 30-pin flex cable connector for control (I²C, extra GPIO), differential data output (4-lane HiSPi+clock) and 3.3V power (additional 2.8V analog and 1.8V digital are generated on board). Short connections can use general purpose flex jumpers (30 conductors, 0.5mm pitch) or Elphel flex cables manufactured for the parallel interface sensors, longer connections require controlled-impedance flex cables with 100Ω differential lines.    −[[Media:10398.pdf|10398 Circuit Diagram, Parts List]] <br/> [[Media:10398_gerber.tar.gz|10398 Gerber files]]+[[Media:10398.pdf|10398 Circuit Diagram, Parts List]] <br/>  +[[Media:10398_gerber.tar.gz|10398 Gerber files]] <br/>  +[[Media:10398_assy.tar.gz|10398 component placement files]] Andrey.filippov

Andrey.filippov uploaded File:10398 assy.tar.gz

New page

== Licensing ==
{{CERN OHLv1.1 }} Andrey.filippov

← Older revision Revision as of 01:02, 11 March 2018 Line 1: Line 1:  ==10338D, 10338E== ==10338D, 10338E==  [[Image:10338d.jpeg|frame|[[Media:10338d.jpeg|10338 board, rev D and E]]]] [[Image:10338d.jpeg|frame|[[Media:10338d.jpeg|10338 board, rev D and E]]]] −[[Image:10338bd.png|frame|[[Media:10338d.pdf|10338D Circuit Diagram, PCB layout]] <br/> [[Media:10338d_gerber.tar.gz|10338 rev D Gerber files]]]]+[[Image:10338bd.png|frame|[[Media:10338d.pdf|10338 rev D Circuit Diagram, PCB layout]] <br/>  +[[Media:10338d_gerber.tar.gz|10338 rev D Gerber files]] <br/>  +[[Media:10338e.pdf|10338 rev E Circuit Diagram, PCB layout]] <br/>  +[[Media:10338e_gerber.tar.gz|10338 rev E Gerber files]] <br/>  +[[Media:10338e_assy.tar.gz|10338 rev E component placement files]]  +]]  10338D/10338E is a modification of the earlier [[10338]] board designed to interface Aptina (before Micron) MT9P031/MT9P001/MT9P006 5MPix (2592x1944) sensor  to [[353|Elphel Model 353 Cameras]]. This board has smaller physical size (15mm x 28mm) to fit in multisensor panoramic setups. 10338D/10338E is a modification of the earlier [[10338]] board designed to interface Aptina (before Micron) MT9P031/MT9P001/MT9P006 5MPix (2592x1944) sensor  to [[353|Elphel Model 353 Cameras]]. This board has smaller physical size (15mm x 28mm) to fit in multisensor panoramic setups.    Andrey.filippov

Andrey.filippov uploaded File:10338e.pdf

New page

== Licensing ==
{{CERN OHLv1.1 }} Andrey.filippov

Andrey.filippov uploaded File:103982 gerber.tar.gz

New page

== Licensing ==
{{CERN OHLv1.1 }} Andrey.filippov

Andrey.filippov uploaded File:103982 assy.tar.gz

New page

== Licensing ==
{{CERN OHLv1.1 }} Andrey.filippov

Andrey.filippov uploaded File:103982.pdf

New page

== Licensing ==
{{CERN OHLv1.1 }} Andrey.filippov

Oleg Dzhimiev committed changes to the Elphel git project :
removed debug prints

Oleg Dzhimiev committed changes to the Elphel git project :
tested & fixed mux for 5MPx sensors

‎Links

← Older revision Revision as of 18:48, 9 March 2018 (One intermediate revision by the same user not shown)Line 106: Line 106:  |[[Image:353-369-359-body-bottom.jpeg|thumb|300px|10353 camera body bottom]] |[[Image:353-369-359-body-bottom.jpeg|thumb|300px|10353 camera body bottom]]  |} |}  +==Links==  +* [[Using_10359_mux_with_10393|Using 10359 mux with 10393]] Oleg

Oleg Dzhimiev committed changes to the Elphel git project :
fixed target_scp