← Older revision Revision as of 05:17, 12 March 2018 Line 2: Line 2:     [[Elphel_camera_parts | Elphel_camera_parts_0353]] [[Elphel_camera_parts | Elphel_camera_parts_0353]]  +  +[https://blog.elphel.com/2015/12/x3d-assemblies-from-any-cad/ Blog post about the software used to create these models]  ==Camera assemblies == ==Camera assemblies ==  === MNC393-XCAM camera === === MNC393-XCAM camera === Andrey.filippov

‎103982

← Older revision Revision as of 02:12, 11 March 2018 (One intermediate revision by the same user not shown)Line 1: Line 1:  ==103982== ==103982== −Sensor front end for CMOSIS CMV12000.+Sensor front end for CMOSIS CMV12000. Can be connected to 1, 2 or 4 [[10393]] system boards. Four system boards provide continuous recording to internal m2 SSD or external eSATA SSD/HDD at full CMV12000 frame rate.     [[Image:103982.png|thumb|400px| [[Image:103982.png|thumb|400px| Line 7: Line 7:  [[Media:103982_assy.tar.gz|103982 placement files]] [[Media:103982_assy.tar.gz|103982 placement files]]  ]] ]]  +  +[[Image:103983.png|thumb|400px|  +[[Media:103983.pdf|103983 (power supply for 103982) circuit diagram, parts list]] <br/>  +[[Media:103983_gerber.tar.gz|103983 Gerber files]] <br/>  +[[Media:103983_assy.tar.gz|103983 placement files]]  +]]  +  +[[Image:103984.png|thumb|400px|  +[[Media:103984.pdf|103984 (development adapter for 103982, 103983) circuit diagram, parts list]] <br/>  +[[Media:103984_gerber.tar.gz|103982 Gerber files]] <br/>  +[[Media:103984_assy.tar.gz|103984 placement files]]  +]]  +<!--  +<gallery widths=400 heights=500 mode=nolines>  +File:103982.png|  +[[Media:103982.pdf|103982 circuit diagram, parts list]] <br/>  +[[Media:103982_gerber.tar.gz|103982 Gerber files]] <br/>  +[[Media:103982_assy.tar.gz|103982 placement files]]  +File:103983.png|  +[[Media:103983.pdf|103983 (power supply for 103982) circuit diagram, parts list]] <br/>  +[[Media:103983_gerber.tar.gz|103983 Gerber files]] <br/>  +[[Media:103983_assy.tar.gz|103983 placement files]]  +File:103984.png|  +[[Media:103984.pdf|103984 (development adapter for 103982, 103983) circuit diagram, parts list]] <br/>  +[[Media:103984_gerber.tar.gz|103982 Gerber files]] <br/>  +[[Media:103984_assy.tar.gz|103984 placement files]]  +</gallery>  +--> Andrey.filippov

Andrey.filippov uploaded File:103984 gerber.tar.gz

New page

== Licensing ==
{{CERN OHLv1.1 }} Andrey.filippov

Andrey.filippov uploaded File:103984 assy.tar.gz

New page

== Licensing ==
{{CERN OHLv1.1 }} Andrey.filippov

Andrey.filippov uploaded File:103984.pdf

New page

== Licensing ==
{{CERN OHLv1.1 }} Andrey.filippov

Andrey.filippov uploaded File:103983 gerber.tar.gz

New page

== Licensing ==
{{CERN OHLv1.1 }} Andrey.filippov

Andrey.filippov uploaded File:103983 assy.tar.gz

New page

== Licensing ==
{{CERN OHLv1.1 }} Andrey.filippov

Andrey.filippov uploaded File:103983.pdf

New page

== Licensing ==
{{CERN OHLv1.1 }} Andrey.filippov

← Older revision Revision as of 01:55, 11 March 2018 Line 2: Line 2:  Sensor front end for CMOSIS CMV12000. Sensor front end for CMOSIS CMV12000.    −''This board is not finalized yet''+[[Image:103982.png|thumb|400px| − +[[Media:103982.pdf|103982 circuit diagram, parts list]] <br/> −[[Media:103982_sch.pdf|103982 Preliminary Circuit Diagram]]+[[Media:103982_gerber.tar.gz|103982 Gerber files]] <br/> − +[[Media:103982_assy.tar.gz|103982 placement files]] −[[Image:103982_42.png|thumb|374px|103982 partial PCB layout]]+]] Andrey.filippov

Andrey.filippov uploaded File:103984.png

New page

== Licensing ==
{{CERN OHLv1.1 }} Andrey.filippov

Andrey.filippov uploaded File:103983.png

New page

== Licensing ==
{{CERN OHLv1.1 }} Andrey.filippov

Andrey.filippov uploaded File:103982.png

New page

== Licensing ==
{{CERN OHLv1.1 }} Andrey.filippov

‎More details

← Older revision Revision as of 01:34, 11 March 2018 Line 79: Line 79:  ==More details== ==More details==  [[Image:10393_bd.png|thumb|400px| [[Image:10393_bd.png|thumb|400px| −[[Media:10393b.pdf|10393 rev B  circuit diagram, parts list, PCB layout]] <br/>+[[Media:10393b.pdf|10393 rev B  circuit diagram, parts list]] <br/>  [[Media:10393b_gerber.tar.gz|10393 rev B  Gerber files]] <br/> [[Media:10393b_gerber.tar.gz|10393 rev B  Gerber files]] <br/> −[[Media:10393b_assy.tar.gz|10393 rev B components placement files]] <br/>+[[Media:10393b_assy.tar.gz|10393 rev B placement files]] <br/> −[[Media:10393c.pdf|10393 rev C  circuit diagram, parts list, PCB layout]] <br/>+[[Media:10393c.pdf|10393 rev C  circuit diagram, parts list]] <br/>  [[Media:10393c_gerber.tar.gz|10393 rev C  Gerber files]] <br/> [[Media:10393c_gerber.tar.gz|10393 rev C  Gerber files]] <br/> −[[Media:10393c_assy.tar.gz|10393 rev C components placement files]]+[[Media:10393c_assy.tar.gz|10393 rev C placement files]]  ]] ]]  This camera system board is designed to simultaneously support multiple sensors - both with legacy parallel interface (it is directly compatible with [[10338|10338 Sensor board]] and [[10359|10359 Sensor multiplexer board]]) and with new high-speed serial interface (up to 8 lanes + clock per each port), such as [[10398 | 10398 14MPix SFE]]. Sensor ports of the 10393 can be combined to interface larger/higher speed sensors, interface supply voltage is programmable in the range of 1.35V to 2.8V. All the sensor port interface signals are routed directly to the FPGA pads (22 I/O signals on each of the 4 flex cable connectors) , so the same ports can be uses for other purposes, for example to control the motors or interface IMU of the quadcopter. This camera system board is designed to simultaneously support multiple sensors - both with legacy parallel interface (it is directly compatible with [[10338|10338 Sensor board]] and [[10359|10359 Sensor multiplexer board]]) and with new high-speed serial interface (up to 8 lanes + clock per each port), such as [[10398 | 10398 14MPix SFE]]. Sensor ports of the 10393 can be combined to interface larger/higher speed sensors, interface supply voltage is programmable in the range of 1.35V to 2.8V. All the sensor port interface signals are routed directly to the FPGA pads (22 I/O signals on each of the 4 flex cable connectors) , so the same ports can be uses for other purposes, for example to control the motors or interface IMU of the quadcopter. Andrey.filippov

‎10338D, 10338E

← Older revision Revision as of 01:33, 11 March 2018 Line 2: Line 2:  [[Image:10338d.jpeg|frame|[[Media:10338d.jpeg|10338 board, rev D and E]]]] [[Image:10338d.jpeg|frame|[[Media:10338d.jpeg|10338 board, rev D and E]]]]  [[Image:10338bd.png|frame| [[Image:10338bd.png|frame| −[[Media:10338d.pdf|10338 rev D circuit diagram, PCB layout]] <br/>+[[Media:10338d.pdf|10338 rev D circuit diagram, parts list]] <br/>  [[Media:10338d_gerber.tar.gz|10338 rev D Gerber files]] <br/> [[Media:10338d_gerber.tar.gz|10338 rev D Gerber files]] <br/> −[[Media:10338e.pdf|10338 rev E circuit diagram, PCB layout]] <br/>+[[Media:10338e.pdf|10338 rev E circuit diagram, parts list]] <br/>  [[Media:10338e_gerber.tar.gz|10338 rev E Gerber files]] <br/> [[Media:10338e_gerber.tar.gz|10338 rev E Gerber files]] <br/>  [[Media:10338e_assy.tar.gz|10338 rev E components placement files]] [[Media:10338e_assy.tar.gz|10338 rev E components placement files]] Andrey.filippov

← Older revision Revision as of 01:32, 11 March 2018 Line 6: Line 6:  [[Image:10385_18-75V_top_sm.png|frame|[[Media:10385_18-75V_top.png|top view]]]] [[Image:10385_18-75V_top_sm.png|frame|[[Media:10385_18-75V_top.png|top view]]]]  ==Links== ==Links== −* [[Media:10386.pdf|10386 rev 0 circuit diagram, parts list, PCB layout]]+* [[Media:10386.pdf|10386 circuit diagram, parts list]] −* [[Media:10386_gerber.tar.gz|10386 rev 0 Gerber files]]+* [[Media:10386_gerber.tar.gz|10386 Gerber files]] −* [[Media:10386_assy.tar.gz|10386 rev 0 components placement files]]+* [[Media:10386_assy.tar.gz|10386 placement files]] Andrey.filippov

← Older revision Revision as of 01:31, 11 March 2018 Line 13: Line 13:  103981 SFE uses the same 30-pin flex cable connector for control (I²C, extra GPIO), differential data output (4-lane HiSPi+clock) and 3.3V power (additional 2.8V analog, 1.8V digital, and 1.2V digital are generated on board). Short connections can use general purpose flex jumpers (30 conductors, 0.5mm pitch) or Elphel flex cables manufactured for the parallel interface sensors, longer connections require controlled-impedance flex cables with 100Ω differential lines. 103981 SFE uses the same 30-pin flex cable connector for control (I²C, extra GPIO), differential data output (4-lane HiSPi+clock) and 3.3V power (additional 2.8V analog, 1.8V digital, and 1.2V digital are generated on board). Short connections can use general purpose flex jumpers (30 conductors, 0.5mm pitch) or Elphel flex cables manufactured for the parallel interface sensors, longer connections require controlled-impedance flex cables with 100Ω differential lines.    −[[Media:103981_sch.pdf|103981 Circuit Diagram]] <br/> [[Media:103981_gerber.tar.gz|103981 Gerber files]] <br/>[[Media:103981_assy.tar.gz|103981 placement files]]+[[Media:103981.pdf|103981 circuit diagram, parts list]] <br/>  +[[Media:103981_gerber.tar.gz|103981 Gerber files]] <br/>  +[[Media:103981_assy.tar.gz|103981 placement files]] Andrey.filippov

Andrey.filippov uploaded File:103981.pdf

New page

== Licensing ==
{{CERN OHLv1.1 }} Andrey.filippov

Andrey.filippov uploaded a new version of File:103981 gerber.tar.gz

New page

== Licensing ==
{{CERN OHLv1.1 }} Andrey.filippov

Andrey.filippov uploaded a new version of File:103981 assy.tar.gz

New page

== Licensing ==
{{CERN OHLv1.1 }} Andrey.filippov

Created page with "==10386== Note: This power supply module provides more power than 10385, but only operates from 48V (36V..72V). Images are shown for 10385b, 10386 board images are not yet..."

New page

==10386==
Note: This power supply module provides more power than [[10385]], but only operates from 48V (36V..72V).
Images are shown for 10385b, 10386 board images are not yet available.

[[Image:10385_bottom_sm.png|frame|[[Media:10385_bottom.png|bottom view]]]]
[[Image:10385_18-75V_top_sm.png|frame|[[Media:10385_18-75V_top.png|top view]]]]
==Links==
* [[Media:10386.pdf|10386 rev 0 circuit diagram, parts list, PCB layout]]
* [[Media:10386_gerber.tar.gz|10386 rev 0 Gerber files]]
* [[Media:10386_assy.tar.gz|10386 rev 0 components placement files]] Andrey.filippov