10369
From ElphelWiki
Revision as of 21:17, 24 June 2008 by Andrey.filippov (talk | contribs)
10369
10369 interface board is an extension board for the Elphel 353/363 series cameras.
- It provides multiple interfaces and peripherals to the camera:
- SATA port for external disk drives
- Compact Flash (in "True IDE" mode) and IDE HDD ports (with adapter/riser boards: 103691, 103692)
- RS-232 port
- Opto-isolated I/O port for synchronizing the camera or synchronizing together multiple cameras (modular RJ11 external connector)
- Opto-isolated I/O port for synchronizing multiple camera modules in the same enclosure (flex cable connectors)
- Digital thermometer with internal ("system") and external thermal sensor (emitter-base junction of PNP or NPN transistor)
- Fan driver, controlled by the digital thermometer with programmable on/off temperature
- Clock/calendar with the super-capacitor backup power
- EEPROM for the board identification and configuration
Connectors
J2 - IDE
| Pin | Signal | Notes |
| 1 | IDE_RST | |
| 2 | GND | |
| 3 | IDE_D[7] | |
| 4 | IDE_D[8] | |
| 5 | IDE_D[6] | |
| 6 | IDE_D[9] | |
| 7 | IDE_D[5] | |
| 8 | IDE_D[10] | |
| 9 | IDE_D[4] | |
| 10 | IDE_D[11] | |
| 11 | IDE_D[3] | |
| 12 | IDE_D[12] | |
| 13 | IDE_D[2] | |
| 14 | IDE_D[13] | |
| 15 | IDE_D[1] | |
| 16 | IDE_D[14] | |
| 17 | IDE_D[0] | |
| 18 | IDE_D[15] | |
| 19 | GND | |
| 20 | GND | |
| 21 | IDE_DMARQ | |
| 22 | GND | |
| 23 | IDE_IOW | |
| 24 | GND | |
| 25 | IDE_IOR | |
| 26 | GND | |
| 27 | IDE_IORDY | |
| 28 | GND | |
| 29 | IDE_DMACK | |
| 30 | GND | |
| 31 | IDE_INTRQ | |
| 32 | EXT_OE | not used |
| 33 | IDE_A[1] | |
| 34 | -- | |
| 35 | IDE_A[0] | |
| 36 | IDE_A[2] | |
| 37 | IDE_CS0 | |
| 38 | IDE_CS1 | |
| 39 | -- | |
| 40 | GND |
