AndreyFilippov committed changes to the Elphel git project :
modified for changed lepton mode register bits

AndreyFilippov committed changes to the Elphel git project :
implemented sync reset, fpga version 0x03930136

‎External trigger receive (external source only)

← Older revision Revision as of 17:55, 2 May 2019 Line 69: Line 69:  ===External trigger receive (external source only)=== ===External trigger receive (external source only)===  The sync cable wires can be looped or not - does not matter. The sync cable wires can be looped or not - does not matter. −  http://192.168.0.9/parsedit.php?sensor_port=0&immediate&TRIG_CONDITION=0x95555&TRIG_OUT=0x0&TRIG_PERIOD=100000000&TRIG=4+  http://192.168.0.9/parsedit.php?sensor_port=0&immediate&TRIG_CONDITION=0x95555&TRIG_OUT=0x66555&TRIG_PERIOD=100000000&TRIG=4  * at the same time the fpga generator outputs a 1 fps signal - if the sync cable wires are properly connected the camera can be triggered from this 'external' signal * at the same time the fpga generator outputs a 1 fps signal - if the sync cable wires are properly connected the camera can be triggered from this 'external' signal    Oleg

AndreyFilippov committed changes to the Elphel git project :
debugging driver for lepton 3.5, works with fpga 0x03930133

Oleg Dzhimiev committed changes to the Elphel git project :
excluded a couple packages (gstreamer and ros) until the rootfs size is expanded

AndreyFilippov committed changes to the Elphel git project :
Seems to be an old bug, preventing sesnor phase adjustment

AndreyFilippov committed changes to the Elphel git project :
reversed, was OK

AndreyFilippov committed changes to the Elphel git project :
bug in interface FPGA code

AndreyFilippov committed changes to the Elphel git project :
update parallel sesnors bitstream, FPGA version 0x03930108

AndreyFilippov committed changes to the Elphel git project :
Debugging vospi mode, fpga: 0x03930133

AndreyFilippov committed changes to the Elphel git project :
re=-arranged i2c pages for lepton sensor

AndreyFilippov committed changes to the Elphel git project :
more on lepton driver

AndreyFilippov committed changes to the Elphel git project :
working on lepton driver

AndreyFilippov committed changes to the Elphel git project :
Merge branch 'lwir' of git.elphel.com:Elphel/x393 into lwir

AndreyFilippov committed changes to the Elphel git project :
implemented telemetry on/off, updated mode bits. FPGA version 0393012e

Oleg Dzhimiev committed changes to the Elphel git project :
Merge branch 'lwir' of https://git.elphel.com/Elphel/x393 into lwir

Oleg Dzhimiev committed changes to the Elphel git project :
set timeout to 500 = 5sec

← Older revision Revision as of 06:00, 26 April 2019 Line 8: Line 8:  {{Cad4a|0393-28-02}} {{Cad4a|0393-28-02}}  ---- ----  +=== 0393-28-021 ===  +{{Cad4a|0393-28-021}}  +----  +  +=== 0393-28-022 ===  +{{Cad4a|0393-28-022}}  +----  +     === 0393-28-03 === === 0393-28-03 === Line 15: Line 23:  === 0393-28-04 === === 0393-28-04 ===  {{Cad4a|0393-28-04}} {{Cad4a|0393-28-04}}  +----  +  +=== 0393-28-041 ===  +{{Cad4a|0393-28-041}}  +----  +  +=== 0393-28-042 ===  +{{Cad4a|0393-28-042}}  ---- ----    Andrey.filippov

AndreyFilippov committed changes to the Elphel git project :
split some parts in 2 to fit smaller sheets

AndreyFilippov committed changes to the Elphel git project :
working with telemetry frame