[elphel353-8.0] By elphel: Adding support for comparing contents of target directory
elphel committed changes to the Elphel project elphel353-8.0 CVS:
Adding support for comparing contents of target directory
Adding support for comparing contents of target directory
- Modified functions rev1.5 - added 81 lines, removed 2 lines
[elphel353-8.0] By elphel: added play_audio.png , target.list
elphel committed changes to the Elphel project elphel353-8.0 CVS:
added play_audio.png , target.list
added play_audio.png , target.list
- Modified src.list rev1.42 - added 5 lines, removed one line
[elphel353-8.0] By elphel: removed obsolete link fore ccam.cgi, moved installation of source tarball out of this Makefile (to the top level one)
elphel committed changes to the Elphel project elphel353-8.0 CVS:
removed obsolete link fore ccam.cgi, moved installation of source tarball out of this Makefile (to the top level one)
removed obsolete link fore ccam.cgi, moved installation of source tarball out of this Makefile (to the top level one)
- Modified Makefile rev1.4 - added 64 lines, removed 15 lines
[elphel353-8.0] By elphel: Making the top installation directory be named after release number
elphel committed changes to the Elphel project elphel353-8.0 CVS:
Making the top installation directory be named after release number
Making the top installation directory be named after release number
- Modified install_elphel_from_cvs rev1.5 - added 6 lines, removed one line
[elphel353-8.0] By elphel: rev 8.0.4.1 - upgraded PHP to 5.2.9 - directories/files added/removed
elphel committed changes to the Elphel project elphel353-8.0 CVS:
rev 8.0.4.1 - upgraded PHP to 5.2.9 - directories/files added/removed
rev 8.0.4.1 - upgraded PHP to 5.2.9 - directories/files added/removed
- Modified src.list rev1.41 - added 11 lines, removed 8 lines
- Modified subdirs.list rev1.12 - added 3 lines, removed 3 lines
- Modified configure_elphel rev1.1 - added none, removed none
- Modified elphize rev1.1 - added none, removed none
- Modified README.ELPHEL rev1.1 - added none, removed none
- Modified GNUmakefile rev1.1 - added none, removed none
- Modified config.m4 rev1.1 - added none, removed none
- Modified elphel_php.c rev1.1 - added none, removed none
- Modified elphel_php.h rev1.1 - added none, removed none
- Modified configure_elphel rev1.1 - added none, removed none
- Modified elphel_release rev1.19 - added one line, removed one line
- Modified post rev1.7 - added 2 lines, removed one line
- Modified lighttpd.conf rev1.3 - added 6 lines, removed 2 lines
[elphel353-8.0] By spectr_rain: yellow lamp turned off when wait for reboot with power cable
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
yellow lamp turned off when wait for reboot with power cable
yellow lamp turned off when wait for reboot with power cable
- Modified nfs_update rev1.13 - added 3 lines, removed none
[elphel353-8.0] By spectr_rain: Unfortunately spectr_rain was too busy to leave any commit message
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
Unfortunately spectr_rain was too busy to leave any commit message
Unfortunately spectr_rain was too busy to leave any commit message
- Modified configure_elphel rev1.2 - added lines, removed lines
[elphel353-8.0] By spectr_rain: Unfortunately spectr_rain was too busy to leave any commit message
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
Unfortunately spectr_rain was too busy to leave any commit message
Unfortunately spectr_rain was too busy to leave any commit message
- Modified configure_elphel rev1.2 - added lines, removed lines
[elphel353-8.0] By spectr_rain: Unfortunately spectr_rain was too busy to leave any commit message
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
Unfortunately spectr_rain was too busy to leave any commit message
Unfortunately spectr_rain was too busy to leave any commit message
- Modified simple_abst.c rev1.2 - added lines, removed lines
[elphel353-8.0] By spectr_rain: removed deprecated ALSA
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
removed deprecated ALSA
removed deprecated ALSA
- Modified src.list rev1.40 - added 3 lines, removed 15 lines
[elphel353-8.0] By spectr_rain: Unfortunately spectr_rain was too busy to leave any commit message
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
Unfortunately spectr_rain was too busy to leave any commit message
Unfortunately spectr_rain was too busy to leave any commit message
- Modified Makefile rev1.2 - added lines, removed lines
[elphel353-8.0] By spectr_rain: Unfortunately spectr_rain was too busy to leave any commit message
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
Unfortunately spectr_rain was too busy to leave any commit message
Unfortunately spectr_rain was too busy to leave any commit message
- Modified Makefile rev1.2 - added lines, removed lines
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command); cam be used on the camera with script reflash as 'reflash rw'
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command); cam be used on the camera with script reflash as 'reflash rw'
- Modified reflash rev1.3 - added 5 lines, removed one line
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
- Modified README.flash rev1.3 - added 4 lines, removed one line
- Modified pt_split rev1.3 - added 51 lines, removed 16 lines
- Modified nfs_update rev1.12 - added 57 lines, removed 4 lines
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
- Modified README.flash rev1.3 - added 4 lines, removed one line
- Modified pt_split rev1.3 - added 51 lines, removed 16 lines
- Modified nfs_update rev1.12 - added 57 lines, removed 4 lines
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
- Modified README.flash rev1.3 - added 4 lines, removed one line
- Modified pt_split rev1.3 - added 51 lines, removed 16 lines
- Modified nfs_update rev1.12 - added 57 lines, removed 4 lines
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
- Modified README.flash rev1.3 - added 4 lines, removed one line
- Modified pt_split rev1.3 - added 51 lines, removed 16 lines
- Modified nfs_update rev1.12 - added 57 lines, removed 4 lines
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
- Modified README.flash rev1.3 - added 4 lines, removed one line
- Modified pt_split rev1.3 - added 51 lines, removed 16 lines
- Modified nfs_update rev1.12 - added 57 lines, removed 4 lines
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
- Modified README.flash rev1.3 - added 4 lines, removed one line
- Modified pt_split rev1.3 - added 51 lines, removed 16 lines
- Modified nfs_update rev1.12 - added 57 lines, removed 4 lines
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
- Modified README.flash rev1.3 - added 4 lines, removed one line
- Modified pt_split rev1.3 - added 51 lines, removed 16 lines
- Modified nfs_update rev1.12 - added 57 lines, removed 4 lines
Pages
