[elphel353-8.0] By oneartplease: mounting of different devices is now possible still needs testing though
oneartplease committed changes to the Elphel project elphel353-8.0 CVS:
mounting of different devices is now possible still needs testing though
mounting of different devices is now possible still needs testing though
- Modified camogm_interface.php rev1.9 - added 15 lines, removed 3 lines
- Modified camogmgui.css rev1.4 - added 38 lines, removed none
- Modified camogmgui.js rev1.7 - added 44 lines, removed 6 lines
- Modified camogmgui.php rev1.8 - added 13 lines, removed 12 lines
[elphel353-8.0] By landy_: Enabling mii-diag while boot camera for logging eth0
landy_ committed changes to the Elphel project elphel353-8.0 CVS:
Enabling mii-diag while boot camera for logging eth0
Enabling mii-diag while boot camera for logging eth0
- Modified elphel_release rev1.22 - added one line, removed one line
[elphel353-8.0] By landy_: Adding net_mii script for automaticaly starting while boot camera
landy_ committed changes to the Elphel project elphel353-8.0 CVS:
Adding net_mii script for automaticaly starting while boot camera
Adding net_mii script for automaticaly starting while boot camera
- Modified target.list rev1.4 - added 3 lines, removed none
[elphel353-8.0] By landy_: Added starting net_mii to rc3.d and rc4.d for logging eth0 status
landy_ committed changes to the Elphel project elphel353-8.0 CVS:
Added starting net_mii to rc3.d and rc4.d for logging eth0 status
Added starting net_mii to rc3.d and rc4.d for logging eth0 status
- Modified Makefile rev1.6 - added 6 lines, removed none
[elphel353-8.0] By landy_: Added script for starting mii-diag after boot camera
landy_ committed changes to the Elphel project elphel353-8.0 CVS:
Added script for starting mii-diag after boot camera
Added script for starting mii-diag after boot camera
- Modified net_mii rev1.1 - added none, removed none
[elphel353-8.0] By landy_: changes for working correct timeout parameter in different start mode mii-diag
landy_ committed changes to the Elphel project elphel353-8.0 CVS:
changes for working correct timeout parameter in different start mode mii-diag
changes for working correct timeout parameter in different start mode mii-diag
- Modified libmii.c rev1.3 - added 8 lines, removed 5 lines
[elphel353-8.0] By landy_: Added switch "-t <n>" for enable start mii-diag with timeout and exit
landy_ committed changes to the Elphel project elphel353-8.0 CVS:
Added switch "-t " for enable start mii-diag with timeout and exit
Added switch "-t " for enable start mii-diag with timeout and exit
- Modified libmii.c rev1.2 - added 8 lines, removed 5 lines
- Modified mii-diag.c rev1.2 - added 24 lines, removed 12 lines
[fpga] By dzhimiev: added GPL headers
dzhimiev committed changes to the Elphel project fpga CVS:
added GPL headers
added GPL headers
- Modified complex_mult.v rev1.2 - added 21 lines, removed 19 lines
- Modified correlation_main.v rev1.3 - added 21 lines, removed 19 lines
- Modified cos_table_256.v rev1.2 - added 21 lines, removed 19 lines
- Modified cs_main.v rev1.2 - added 21 lines, removed 19 lines
[fpga] By dzhimiev: new initial version...
dzhimiev committed changes to the Elphel project fpga CVS:
new initial version 1. simulation and board test availability
new initial version 1. simulation and board test availability
- Modified channel_rd.v rev1.1 - added none, removed none
- Modified channel_wr.v rev1.1 - added none, removed none
- Modified clkios353.v rev1.1 - added none, removed none
- Modified complex_butterfly.v rev1.2 - added none, removed none
- Modified complex_butterfly_last.v rev1.2 - added none, removed none
- Modified correlation_main.v rev1.2 - added 95 lines, removed 22 lines
- Modified ddr.v rev1.1 - added none, removed none
- Modified ddr_parameters.v rev1.1 - added none, removed none
- Modified descrproc353.v rev1.1 - added none, removed none
- Modified fft256.v rev1.2 - added 6 lines, removed 2 lines
- Modified fft_ctrl.v rev1.2 - added none, removed none
- Modified glbl.v rev1.2 - added none, removed none
- Modified i2csbr.v rev1.1 - added none, removed none
- Modified ioports353.v rev1.1 - added none, removed none
- Modified macros353.v rev1.1 - added none, removed none
- Modified mcontr359.v rev1.1 - added none, removed none
- Modified mcontr_arbiter.v rev1.1 - added none, removed none
- Modified mcontr_cmd.v rev1.1 - added none, removed none
- Modified mcontr_line_rd.v rev1.1 - added none, removed none
- Modified mcontr_line_wr.v rev1.1 - added none, removed none
- Modified mcontr_refresh.v rev1.1 - added none, removed none
- Modified sdram_phase.v rev1.1 - added none, removed none
- Modified sensor12bits.v rev1.1 - added none, removed none
- Modified x359.bit rev1.1 - added none, removed none
- Modified x359.par rev1.1 - added none, removed none
- Modified x359.syr rev1.1 - added none, removed none
- Modified x359.tf rev1.1 - added none, removed none
- Modified x359.ucf rev1.1 - added none, removed none
- Modified x359.v rev1.1 - added none, removed none
- Modified x359_ddr_test.v rev1.1 - added none, removed none
- Modified x359_map.mrp rev1.1 - added none, removed none
- Modified x359_pad.txt rev1.1 - added none, removed none
- Modified x359_sim.sh rev1.1 - added none, removed none
[elphel353-8.0] By elphel: disabled debug log
elphel committed changes to the Elphel project elphel353-8.0 CVS:
disabled debug log
disabled debug log
- Modified ccamftp.php rev1.4 - added 4 lines, removed one line
[elphel353-8.0] By elphel: Fixed couple bugs, added debug notes
elphel committed changes to the Elphel project elphel353-8.0 CVS:
Fixed couple bugs, added debug notes
Fixed couple bugs, added debug notes
- Modified ccamftp.php rev1.3 - added 27 lines, removed 7 lines
[elphel353-8.0] By oneartplease: added device listing function
oneartplease committed changes to the Elphel project elphel353-8.0 CVS:
added device listing function
added device listing function
- Modified camogm_interface.php rev1.8 - added 46 lines, removed none
[prod353] By oneartplease: updated firmware compilation part
oneartplease committed changes to the Elphel project prod353 CVS:
updated firmware compilation part
updated firmware compilation part
- Modified INSTALL rev1.5 - added 9 lines, removed one line
[prod353] By oneartplease: ...
oneartplease committed changes to the Elphel project prod353 CVS:
fixed typos, tried to improve first sentence
fixed typos, tried to improve first sentence
- Modified INSTALL rev1.4 - added 3 lines, removed 2 lines
[elphel353-8.0] By landy_: Fixed SDES field for correct sending RTCP (RFC3550)
landy_ committed changes to the Elphel project elphel353-8.0 CVS:
Fixed SDES field for correct sending RTCP (RFC3550)
Fixed SDES field for correct sending RTCP (RFC3550)
- Modified rtp_stream.cpp rev1.8 - added 15 lines, removed 3 lines
[elphel353-8.0] By dzhimiev: 1. commented unused constraints for run in ISE 11.1
dzhimiev committed changes to the Elphel project elphel353-8.0 CVS:
1. commented unused constraints for run in ISE 11.1
1. commented unused constraints for run in ISE 11.1
- Modified x359.ucf rev1.3 - added 16 lines, removed 176 lines
[elphel353-8.0] By dzhimiev: 1. corrected interface mistakes
dzhimiev committed changes to the Elphel project elphel353-8.0 CVS:
1. corrected interface mistakes
1. corrected interface mistakes
- Modified mcontr359.v rev1.2 - added 297 lines, removed 171 lines
[elphel353-8.0] By landy_: Fixed TTL on initial RTSP session. Set to default 64
landy_ committed changes to the Elphel project elphel353-8.0 CVS:
Fixed TTL on initial RTSP session. Set to default 64
Fixed TTL on initial RTSP session. Set to default 64
- Modified socket.cpp rev1.5 - added 2 lines, removed one line
- Modified socket.h rev1.5 - added one line, removed one line
[elphel353-8.0] By oneartplease: used a different method to set quicktime mov as default container after camogm startup
oneartplease committed changes to the Elphel project elphel353-8.0 CVS:
used a different method to set quicktime mov as default container after camogm startup
used a different method to set quicktime mov as default container after camogm startup
- Modified camogm_interface.php rev1.7 - added 3 lines, removed one line
- Modified camogmgui.js rev1.6 - added one line, removed none
- Modified camogmgui.php rev1.7 - added 3 lines, removed one line
[elphel353-8.0] By oneartplease: fixed bug:...
oneartplease committed changes to the Elphel project elphel353-8.0 CVS:
fixed bug: -) "refresh button" does not refresh free space when removing files increased delay when starting up camogmgui before attempting to mount HDD
fixed bug: -) "refresh button" does not refresh free space when removing files increased delay when starting up camogmgui before attempting to mount HDD
- Modified camogmgui.js rev1.5 - added 54 lines, removed 34 lines
- Modified camogmgui.php rev1.6 - added one line, removed one line
Pages
