Mikhail Karpenko committed changes to the Elphel git project :
Add 3D printed IMU+GPS platform and enclosure

AndreyFilippov committed changes to the Elphel git project :
working on cartesian-defined multi-cameras

AndreyFilippov committed changes to the Elphel git project :
working on cartesian-defined multi-cameras

Created page with "103892 Fan connector adapter PCB is glued inside fan enclosure, with pins penetrating inside the camera and getting power from the 103891 board. It is used in [[10393..."

New page

103892 Fan connector adapter PCB is glued inside fan enclosure, with pins penetrating inside the camera and getting power from the [[103891| 103891 board]]. It is used in [[10393|Elphel 393 series cameras]].

103892 Provides +3.3V, +5.0V, GND and software-controlled open drain switch to ground.

==Mechanical properties==
* Dimensions: 8 x 8 x 9.5 mm (with connector installed)
* Weight: 1.0 g
* Mechanical drawings and CAD files for the 103892 board: [[Elphel_camera_parts_0393-00#0393-00-24_-_103892_Fan_connector_adapter_PCB_assembly|link]]


==Links==
* [[Media:103892.pdf|103892 Circuit Diagram, Parts List, PCB layout]]
* [[Media:103892 gerber.tar.gz|103892 Gerber files]] Andrey.filippov

Created page with "103891 adapter board routes external sync I/O from the 10389 interface board to the back panel 2.5mm barrel connector and provide 4-pic connector socket for 3.3V/5.0V..."

New page

103891 adapter board routes external sync I/O from the [[10389| 10389 interface board]] to the back panel 2.5mm barrel connector and provide 4-pic connector socket for 3.3V/5.0V fan. It is used in [[10393|Elphel 393 series cameras]]

==Mechanical properties==
* Dimensions: 58 x 38 x 9 mm (all connectors installed)
* Weight: 3.0 g
* Mechanical drawings and CAD files for the 103891 board: [[Elphel_camera_parts_0393-00#0393-00-23A_-_103891_rev_A_external_synchronization_and_fan_PCB_assembly|link]]


==Links==
* [[Media:103891a.pdf|103891 Rev "A" Circuit Diagram, Parts List, PCB layout]]
* [[Media:103891a gerber.tar.gz|103891 Rev "A" Gerber files]] Andrey.filippov

More details:

← Older revision Revision as of 21:34, 13 February 2017 Line 69: Line 69: ==More details== ==More details== -[[Image:10393_bd.png|thumb|400px|[[Media:10393.pdf|10393 Circuit Diagram, Parts List, PCB layout]]     [[Media:10393_gerber.tar.gz|10393 Gerber files]]]]+[[Image:10393_bd.png|thumb|400px|[[Media:10393b.pdf|10393 Rev "B"  Circuit Diagram, Parts List, PCB layout]]     [[Media:10393b_gerber.tar.gz|10393 rev "B"  Gerber files]]]] This camera system board is designed to simultaneously support multiple sensors - both with legacy parallel interface (it is directly compatible with [[10338|10338 Sensor board]] and [[10359|10359 Sensor multiplexer board]]) and with new high-speed serial interface (up to 8 lanes + clock per each port), such as [[10398 | 10398 14MPix SFE]]. Sensor ports of the 10393 can be combined to interface larger/higher speed sensors, interface supply voltage is programmable in the range of 1.35V to 2.8V. All the sensor port interface signals are routed directly to the FPGA pads (22 I/O signals on each of the 4 flex cable connectors) , so the same ports can be uses for other purposes, for example to control the motors or interface IMU of the quadcopter. This camera system board is designed to simultaneously support multiple sensors - both with legacy parallel interface (it is directly compatible with [[10338|10338 Sensor board]] and [[10359|10359 Sensor multiplexer board]]) and with new high-speed serial interface (up to 8 lanes + clock per each port), such as [[10398 | 10398 14MPix SFE]]. Sensor ports of the 10393 can be combined to interface larger/higher speed sensors, interface supply voltage is programmable in the range of 1.35V to 2.8V. All the sensor port interface signals are routed directly to the FPGA pads (22 I/O signals on each of the 4 flex cable connectors) , so the same ports can be uses for other purposes, for example to control the motors or interface IMU of the quadcopter. Andrey.filippov

uploaded "[[File:103892 gerber.tar.gz]]"

Andrey.filippov

uploaded a new version of "[[File:10389b.pdf]]"

Andrey.filippov

AndreyFilippov committed changes to the Elphel git project :
modifying CLT window - using sin/cos rotation of the window

AndreyFilippov committed changes to the Elphel git project :
modifying CLT window - using sin/cos rotation of the window

AndreyFilippov committed changes to the Elphel git project :
modifying CLT window for shift

AndreyFilippov committed changes to the Elphel git project :
modifying CLT window for shift

AndreyFilippov committed changes to the Elphel git project :
aberration correction with clt

AndreyFilippov committed changes to the Elphel git project :
aberration correction with clt

line-scan with Elphel:

← Older revision Revision as of 19:24, 9 February 2017 (2 intermediate revisions not shown)Line 32: Line 32: In photo-finish mode the camera then samples just lines and delivers composite images as video frames via RTSP network stream or directly to a hard-disc. Programming the camera into line-scan mode is as simple as setting PH_HEIGHT to the desired line height (in pixel): In photo-finish mode the camera then samples just lines and delivers composite images as video frames via RTSP network stream or directly to a hard-disc. Programming the camera into line-scan mode is as simple as setting PH_HEIGHT to the desired line height (in pixel): -PH_HEIGHT=2+* '''set COMPRESSOR_RUN=0'''  +* '''set PH_HEIGHT=2'''  +* '''set COMPRESSOR_RUN=2'''  +   + Quick link to access parameters that might be useful: http://192.168.0.9/parsedit.php?WB_EN&AUTOEXP_ON&EXPOS&COMPRESSOR_RUN&TRIG&TRIG_PERIOD&PF_HEIGHT&WOI_HEIGHT&WOI_TOP&WOI_LEFT&WOI_WIDTH  + For more details see: [[Elphel_353_series_quick_start_guide#Accessing_camera_parameters|accessing camera parameters]] Due to the Bayer pattern of the sensor the minimal sample height is 2 lines. Due to the Bayer pattern of the sensor the minimal sample height is 2 lines. Oleg

Examples:

← Older revision Revision as of 21:50, 8 February 2017 Line 64: Line 64: ====Internal (from fpga generator)==== ====Internal (from fpga generator)====  +* COMPRESSOR_RUN=0x0 * TRIG_CONDITION=0x0 * TRIG_CONDITION=0x0 * set the TRIG_PERIOD * set the TRIG_PERIOD * TRIG=0x4 * TRIG=0x4  +* COMPRESSOR_RUN=0x2 OR OR Line 74: Line 76: ====Internal (from fpga generator) + output the trigger signal==== ====Internal (from fpga generator) + output the trigger signal====  +* COMPRESSOR_RUN=0x0 * TRIG_CONDITION=0x0 * TRIG_CONDITION=0x0 * set the TRIG_PERIOD * set the TRIG_PERIOD * TRIG=0x4 * TRIG=0x4 * TRIG_OUT=0x800000 * TRIG_OUT=0x800000  +* COMPRESSOR_RUN=0x2 ====External (J15)==== ====External (J15)==== Oleg

AndreyFilippov committed changes to the Elphel git project :
converting kernels

AndreyFilippov committed changes to the Elphel git project :
converting kernels

Mikhail Karpenko committed changes to the Elphel git project :
Add default net mask

Mikhail Karpenko committed changes to the Elphel git project :
Add default net mask