Combined CVS commit logs for the files of the Elphel projects .
Updated: 23 min 8 sec ago
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
- Modified README.flash rev1.3 - added 4 lines, removed one line
- Modified pt_split rev1.3 - added 51 lines, removed 16 lines
- Modified nfs_update rev1.12 - added 57 lines, removed 4 lines
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
- Modified README.flash rev1.3 - added 4 lines, removed one line
- Modified pt_split rev1.3 - added 51 lines, removed 16 lines
- Modified nfs_update rev1.12 - added 57 lines, removed 4 lines
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
- Modified README.flash rev1.3 - added 4 lines, removed one line
- Modified pt_split rev1.3 - added 51 lines, removed 16 lines
- Modified nfs_update rev1.12 - added 57 lines, removed 4 lines
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
- Modified README.flash rev1.3 - added 4 lines, removed one line
- Modified pt_split rev1.3 - added 51 lines, removed 16 lines
- Modified nfs_update rev1.12 - added 57 lines, removed 4 lines
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
- Modified README.flash rev1.3 - added 4 lines, removed one line
- Modified pt_split rev1.3 - added 51 lines, removed 16 lines
- Modified nfs_update rev1.12 - added 57 lines, removed 4 lines
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
- Modified README.flash rev1.3 - added 4 lines, removed one line
- Modified pt_split rev1.3 - added 51 lines, removed 16 lines
- Modified nfs_update rev1.12 - added 57 lines, removed 4 lines
[elphel353-8.0] By spectr_rain: Unfortunately spectr_rain was too busy to leave any commit message
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
Unfortunately spectr_rain was too busy to leave any commit message
Unfortunately spectr_rain was too busy to leave any commit message
- Modified configure_elphel rev1.3 - added lines, removed lines
[elphel353-8.0] By spectr_rain: runlevel 4 now is used for netboot with kimage
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
runlevel 4 now is used for netboot with kimage
runlevel 4 now is used for netboot with kimage
- Modified ktest_prepare rev1.2 - added 4 lines, removed one line
[elphel353-8.0] By spectr_rain: runlevel 4 corrections - used for netboot with kimage
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
runlevel 4 corrections - used for netboot with kimage
runlevel 4 corrections - used for netboot with kimage
- Modified Makefile rev1.5 - added 2 lines, removed one line
- Modified Makefile rev1.2 - added 2 lines, removed 4 lines
[elphel353-8.0] By landy_: Enable gzip/bzip options in tar
landy_ committed changes to the Elphel project elphel353-8.0 CVS:
Enable gzip/bzip options in tar
Enable gzip/bzip options in tar
- Modified busyboxconfig rev1.2 - added 14 lines, removed 14 lines
[elphel353-7.1-community] By skinkie: ...
![[elphel353-7.1-community] By skinkie: ...](http://elphelcommunity.cvs.sourceforge.net/viewvc/elphelcommunity/elphel353-7.1-community/apps/widgets/compass/compass.svg?revision=1.2&view=markup){kind=link}
skinkie committed changes to the Elphel project elphel353-7.1-community CVS:
No reason to wait a second at startup :) The reason why we don't use setInterval here is because this could flood the camera if for some reason the request did not succeed.
No reason to wait a second at startup :) The reason why we don't use setInterval here is because this could flood the camera if for some reason the request did not succeed.
- Modified compass.svg rev1.2 - added one line, removed one line
[elphel353-8.0] By landy_: Changes for remove bug in lighttpd(mod_webdav) with sqlite3 on first start...
landy_ committed changes to the Elphel project elphel353-8.0 CVS:
Changes for remove bug in lighttpd(mod_webdav) with sqlite3 on first start witthout lock database
Changes for remove bug in lighttpd(mod_webdav) with sqlite3 on first start witthout lock database
- Modified configure_elphel rev1.3 - added 78 lines, removed 2 lines
[elphel353-8.0] By oneartplease: audio and geotagging updates, both are not fully working yet though
oneartplease committed changes to the Elphel project elphel353-8.0 CVS:
audio and geotagging updates, both are not fully working yet though
audio and geotagging updates, both are not fully working yet though
- Modified Makefile rev1.3 - added one line, removed one line
- Modified camogm_interface.php rev1.5 - added 17 lines, removed one line
- Modified camogmgui.css rev1.3 - added 3 lines, removed 3 lines
- Modified camogmgui.js rev1.4 - added 42 lines, removed none
- Modified camogmgui.php rev1.4 - added 95 lines, removed 14 lines
- Modified play_audio.png rev1.1 - added none, removed none
[elphel353-8.0] By landy_: New version sqlite-3.16.1, busybox-1.13.3 and mod_webdav in lighttpd added
landy_ committed changes to the Elphel project elphel353-8.0 CVS:
New version sqlite-3.16.1, busybox-1.13.3 and mod_webdav in lighttpd added
New version sqlite-3.16.1, busybox-1.13.3 and mod_webdav in lighttpd added
- Modified src.list rev1.39 - added 7 lines, removed 4 lines
- Modified configure_elphel rev1.2 - added 152 lines, removed 4 lines
- Modified elphel_release rev1.18 - added one line, removed one line
- Modified post rev1.6 - added 2 lines, removed 2 lines
- Modified lighttpd.conf rev1.2 - added 17 lines, removed 5 lines
[elphel353-8.0] By landy_: Redefine LARGEST_INT64 for building with gcc-cris v32 on 64 bit host
landy_ committed changes to the Elphel project elphel353-8.0 CVS:
Redefine LARGEST_INT64 for building with gcc-cris v32 on 64 bit host
Redefine LARGEST_INT64 for building with gcc-cris v32 on 64 bit host
- Modified configure_elphel rev1.2 - added 17 lines, removed none
[elphel353-8.0] By landy_: Add busybox-1.13.3 version to CVS
landy_ committed changes to the Elphel project elphel353-8.0 CVS:
Add busybox-1.13.3 version to CVS
Add busybox-1.13.3 version to CVS
- Modified busyboxconfig rev1.1 - added none, removed none
- Modified configure_elphel rev1.1 - added none, removed none
[elphel353-8.0] By landy_: Add sqlite-3.6.11 to repository
landy_ committed changes to the Elphel project elphel353-8.0 CVS:
Add sqlite-3.6.11 to repository
Add sqlite-3.6.11 to repository
- Modified configure_elphel rev1.1 - added none, removed none
[elphel353-7.1-community] By skinkie: ...
skinkie committed changes to the Elphel project elphel353-7.1-community CVS:
This code adds a compass demo application; to be including within other webgui's.
This code adds a compass demo application; to be including within other webgui's.
- Modified lighttpd.conf rev1.2 - added 2 lines, removed one line
[elphel353-7.1-community] By skinkie: ...
skinkie committed changes to the Elphel project elphel353-7.1-community CVS:
This code adds a compass demo application; to be including within other webgui's.
This code adds a compass demo application; to be including within other webgui's.
- Modified README.TXT rev1.1 - added none, removed none
- Modified compass.svg rev1.1 - added none, removed none
- Modified export_exif.php rev1.1 - added none, removed none
- Modified index.html rev1.1 - added none, removed none
- Modified json_parse.js rev1.1 - added none, removed none
[elphel353-8.0] By spectr_rain: changed init.d usb script start level from 99 to 98
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
changed init.d usb script start level from 99 to 98
changed init.d usb script start level from 99 to 98
- Modified src.list rev1.38 - added 5 lines, removed none