AndreyFilippov committed changes to the Elphel git project :
added Lepton 3.5 FPS

AndreyFilippov committed changes to the Elphel git project :
Adding tiff mode

AndreyFilippov committed changes to the Elphel git project :
0x03930138 - trigger output from LWIR

← Older revision Revision as of 19:26, 6 May 2019 Line 1: Line 1:  ==<font color="blue">Description</font>== ==<font color="blue">Description</font>== −10389 board is required (and possible 103891).+[[10389]] board is required (and possibly [[103891]]).     Use cases: Use cases: Andrey.filippov

AndreyFilippov committed changes to the Elphel git project :
modified for Lepton, tested with FPGA 0x03930137

AndreyFilippov committed changes to the Elphel git project :
adding rigger out from the sensors running i free mode

AndreyFilippov committed changes to the Elphel git project :
modified for changed lepton mode register bits

AndreyFilippov committed changes to the Elphel git project :
implemented sync reset, fpga version 0x03930136

‎External trigger receive (external source only)

← Older revision Revision as of 17:55, 2 May 2019 Line 69: Line 69:  ===External trigger receive (external source only)=== ===External trigger receive (external source only)===  The sync cable wires can be looped or not - does not matter. The sync cable wires can be looped or not - does not matter. −  http://192.168.0.9/parsedit.php?sensor_port=0&immediate&TRIG_CONDITION=0x95555&TRIG_OUT=0x0&TRIG_PERIOD=100000000&TRIG=4+  http://192.168.0.9/parsedit.php?sensor_port=0&immediate&TRIG_CONDITION=0x95555&TRIG_OUT=0x66555&TRIG_PERIOD=100000000&TRIG=4  * at the same time the fpga generator outputs a 1 fps signal - if the sync cable wires are properly connected the camera can be triggered from this 'external' signal * at the same time the fpga generator outputs a 1 fps signal - if the sync cable wires are properly connected the camera can be triggered from this 'external' signal    Oleg

AndreyFilippov committed changes to the Elphel git project :
debugging driver for lepton 3.5, works with fpga 0x03930133

Oleg Dzhimiev committed changes to the Elphel git project :
excluded a couple packages (gstreamer and ros) until the rootfs size is expanded

AndreyFilippov committed changes to the Elphel git project :
Seems to be an old bug, preventing sesnor phase adjustment

AndreyFilippov committed changes to the Elphel git project :
reversed, was OK

AndreyFilippov committed changes to the Elphel git project :
bug in interface FPGA code

AndreyFilippov committed changes to the Elphel git project :
update parallel sesnors bitstream, FPGA version 0x03930108

AndreyFilippov committed changes to the Elphel git project :
Debugging vospi mode, fpga: 0x03930133

AndreyFilippov committed changes to the Elphel git project :
re=-arranged i2c pages for lepton sensor

AndreyFilippov committed changes to the Elphel git project :
more on lepton driver

AndreyFilippov committed changes to the Elphel git project :
working on lepton driver

AndreyFilippov committed changes to the Elphel git project :
Merge branch 'lwir' of git.elphel.com:Elphel/x393 into lwir