[elphel353-7.1] By spectr_rain: MDI/MDIX configuration
spectr_rain committed changes to the Elphel project elphel353-7.1 CVS:
MDI/MDIX configuration
MDI/MDIX configuration
- Modified conf rev1.2 - added 3 lines, removed none
[elphel353-7.1] By elphel: updated to make use of elhel_fpga_* (extension) instead of file read/write
elphel committed changes to the Elphel project elphel353-7.1 CVS:
updated to make use of elhel_fpga_* (extension) instead of file read/write
updated to make use of elhel_fpga_* (extension) instead of file read/write
- Modified fpga.php rev1.2 - added 38 lines, removed 44 lines
[elphel353-7.1] By elphel: started sync.php to setup synchronization (10369/10371 boards)
elphel committed changes to the Elphel project elphel353-7.1 CVS:
started sync.php to setup synchronization (10369/10371 boards)
started sync.php to setup synchronization (10369/10371 boards)
- Modified sync.php rev1.1 - added none, removed none
[fpga] By jlarrey: Unfortunately jlarrey was too busy to leave any commit message
jlarrey committed changes to the Elphel project fpga CVS:
Unfortunately jlarrey was too busy to leave any commit message
Unfortunately jlarrey was too busy to leave any commit message
- Modified x353_sim.sh rev1.2 - added 5 lines, removed 5 lines
[elphel353-7.1] By elphel: increased default delays fro I2c bus 1 (EEPROM was not fast enough)
elphel committed changes to the Elphel project elphel353-7.1 CVS:
increased default delays fro I2c bus 1 (EEPROM was not fast enough)
increased default delays fro I2c bus 1 (EEPROM was not fast enough)
- Modified cxi2c.c rev1.6 - added 18 lines, removed 6 lines
[elphel353-7.1] By elphel: changed include_path sequence
elphel committed changes to the Elphel project elphel353-7.1 CVS:
changed include_path sequence
changed include_path sequence
- Modified php.ini rev1.5 - added one line, removed one line
[elphel353-7.1] By elphel: Added i2c speed control interface
elphel committed changes to the Elphel project elphel353-7.1 CVS:
Added i2c speed control interface
Added i2c speed control interface
- Modified i2c.inc rev1.2 - added 30 lines, removed none
- Modified i2c.php rev1.6 - added 15 lines, removed none
[elphel353-7.1] By elphel: split i2c.php into i2c.php and i2c.inc (to be used from other scripts)
elphel committed changes to the Elphel project elphel353-7.1 CVS:
split i2c.php into i2c.php and i2c.inc (to be used from other scripts)
split i2c.php into i2c.php and i2c.inc (to be used from other scripts)
- Modified src.list rev1.46 - added 4 lines, removed none
- Modified php.ini rev1.4 - added one line, removed none
- Modified Makefile rev1.7 - added 10 lines, removed 4 lines
- Modified i2c.inc rev1.1 - added none, removed none
- Modified i2c.php rev1.5 - added 14 lines, removed 118 lines
[elphel353-7.1] By elphel: 7.1.7.18 - EEPROM support
elphel committed changes to the Elphel project elphel353-7.1 CVS:
7.1.7.18 - EEPROM support
7.1.7.18 - EEPROM support
- Modified elphel_release rev1.44 - added one line, removed one line
[elphel353-7.1] By elphel: new wrapper for Axis bootblocktool - old CGI mode used non-standard parameters and did not work with lighttpd
elphel committed changes to the Elphel project elphel353-7.1 CVS:
new wrapper for Axis bootblocktool - old CGI mode used non-standard parameters and did not work with lighttpd
new wrapper for Axis bootblocktool - old CGI mode used non-standard parameters and did not work with lighttpd
- Modified src.list rev1.45 - added 4 lines, removed none
- Modified Makefile rev1.6 - added 2 lines, removed one line
- Modified paramtool.php rev1.1 - added none, removed none
[elphel353-7.1] By elphel: Implemented add-on boards EEPROM support
elphel committed changes to the Elphel project elphel353-7.1 CVS:
Implemented add-on boards EEPROM support
Implemented add-on boards EEPROM support
- Modified i2c.php rev1.4 - added 103 lines, removed 4 lines
[elphel353-7.1] By elphel: 6.1.7.17 - Added libxml2 and simplexml support in php
elphel committed changes to the Elphel project elphel353-7.1 CVS:
6.1.7.17 - Added libxml2 and simplexml support in php
6.1.7.17 - Added libxml2 and simplexml support in php
- Modified src.list rev1.44 - added 5 lines, removed none
- Modified subdirs.list rev1.14 - added one line, removed none
- Modified configure_axis rev1.6 - added 5 lines, removed 3 lines
- Modified elphel_release rev1.43 - added one line, removed one line
- Modified post rev1.7 - added one line, removed none
[elphel353-7.1] By elphel: recurse: process "." in subdirs list, but disable recurse (was needed for libxml2)
elphel committed changes to the Elphel project elphel353-7.1 CVS:
recurse: process "." in subdirs list, but disable recurse (was needed for libxml2)
recurse: process "." in subdirs list, but disable recurse (was needed for libxml2)
- Modified recurse.mak rev1.2 - added 6 lines, removed none
[elphel353-7.1] By elphel: pre-configuration file for libxml2 library on arch/cris
elphel committed changes to the Elphel project elphel353-7.1 CVS:
pre-configuration file for libxml2 library on arch/cris
pre-configuration file for libxml2 library on arch/cris
- Modified configure_axis rev1.1 - added none, removed none
[fpga] By jlarrey: Unfortunately jlarrey was too busy to leave any commit message
jlarrey committed changes to the Elphel project fpga CVS:
Unfortunately jlarrey was too busy to leave any commit message
Unfortunately jlarrey was too busy to leave any commit message
- Modified xdct333.v rev1.2 - added none, removed none
[fpga] By jlarrey: Unfortunately jlarrey was too busy to leave any commit message
jlarrey committed changes to the Elphel project fpga CVS:
Unfortunately jlarrey was too busy to leave any commit message
Unfortunately jlarrey was too busy to leave any commit message
- Modified channel1.v rev1.1 - added none, removed none
[fpga] By jlarrey: Unfortunately jlarrey was too busy to leave any commit message
jlarrey committed changes to the Elphel project fpga CVS:
Unfortunately jlarrey was too busy to leave any commit message
Unfortunately jlarrey was too busy to leave any commit message
- Modified channel0.v rev1.1 - added none, removed none
[elphel353-7.1] By landy_: new target in Makefile - copy images to NFS server by "make nfs"
landy_ committed changes to the Elphel project elphel353-7.1 CVS:
new target in Makefile - copy images to NFS server by "make nfs"
new target in Makefile - copy images to NFS server by "make nfs"
- Modified elphel_release rev1.42 - added one line, removed one line
[elphel353-7.1] By landy_: Added new target to project - copy builded images for camera to NFS server
landy_ committed changes to the Elphel project elphel353-7.1 CVS:
Added new target to project - copy builded images for camera to NFS server
Added new target to project - copy builded images for camera to NFS server
- Modified install_elphel_from_cvs rev1.7 - added one line, removed none
- Modified src.list rev1.43 - added 4 lines, removed none
- Modified functions rev1.11 - added 16 lines, removed none
[elphel353-7.1] By landy_: Added nfs_copy script for copying images to NFS server by "make nfs"
landy_ committed changes to the Elphel project elphel353-7.1 CVS:
Added nfs_copy script for copying images to NFS server by "make nfs"
Added nfs_copy script for copying images to NFS server by "make nfs"
- Modified nfs_copy rev1.1 - added none, removed none
Pages
