[elphel353-7.1] By dzhimiev: 1. added more scripts for 10359 board
dzhimiev committed changes to the Elphel project elphel353-7.1 CVS:
1. added more scripts for 10359 board
1. added more scripts for 10359 board
- Modified src.list rev1.67 - added 6 lines, removed one line
- Modified mem_read.php rev1.1 - added none, removed none
- Modified mem_test.php rev1.4 - added 3 lines, removed none
- Modified phases_adjust.php rev1.1 - added none, removed none
- Modified reg_write.php rev1.1 - added none, removed none
- Modified sensors_init.php rev1.4 - added 6 lines, removed 2 lines
- Modified switch_to_ch2.php rev1.3 - added 3 lines, removed none
- Modified tests_for_96mhz.php rev1.5 - added 3 lines, removed none
[elphel353-7.2] By elphel: another snapshot
elphel committed changes to the Elphel project elphel353-7.2 CVS:
another snapshot
another snapshot
- Modified framepars.c rev1.6 - added 7 lines, removed none
- Modified framepars.h rev1.5 - added 5 lines, removed one line
- Modified mt9x001.c rev1.3 - added 44 lines, removed 33 lines
- Modified mt9x001.h rev1.2 - added 3 lines, removed 3 lines
- Modified param_depend.h rev1.3 - added 9 lines, removed 7 lines
- Modified x353.h rev1.8 - added 26 lines, removed none
- Modified c313a.h rev1.7 - added 42 lines, removed 40 lines
[elphel353-7.2] By elphel: just a snapshot
elphel committed changes to the Elphel project elphel353-7.2 CVS:
just a snapshot
just a snapshot
- Modified sensor_common.c rev1.2 - added 4 lines, removed none
[elphel353-7.2] By elphel: added control_regs.v
elphel committed changes to the Elphel project elphel353-7.2 CVS:
added control_regs.v
added control_regs.v
- Modified src.list rev1.7 - added 4 lines, removed none
[elphel353-7.2] By elphel: continuing work - just a snapshot
elphel committed changes to the Elphel project elphel353-7.2 CVS:
continuing work - just a snapshot
continuing work - just a snapshot
- Modified cc353.h rev1.3 - added none, removed 24 lines
- Modified cxi2c.c rev1.2 - added 23 lines, removed 22 lines
- Modified framepars.c rev1.5 - added 32 lines, removed 7 lines
- Modified framepars.h rev1.4 - added 2 lines, removed 2 lines
- Modified x353.h rev1.7 - added 99 lines, removed 83 lines
- Modified c313a.h rev1.6 - added 54 lines, removed 20 lines
[elphel353-7.2] By elphel: added P_VIRT_KEEP parameter to enable VIRT_WIDTH, VIRT_HEIGHT preservation (if !=0), otherwise these parameters are set to minimalallowed by sensor an FPS limit
elphel committed changes to the Elphel project elphel353-7.2 CVS:
added P_VIRT_KEEP parameter to enable VIRT_WIDTH, VIRT_HEIGHT preservation (if !=0), otherwise these parameters are set to minimalallowed by sensor an FPS limit
added P_VIRT_KEEP parameter to enable VIRT_WIDTH, VIRT_HEIGHT preservation (if !=0), otherwise these parameters are set to minimalallowed by sensor an FPS limit
- Modified mt9x001.c rev1.2 - added 22 lines, removed 10 lines
[elphel353-7.2] By elphel: Support fro new parameters (vignetting correction related)
elphel committed changes to the Elphel project elphel353-7.2 CVS:
Support fro new parameters (vignetting correction related)
Support fro new parameters (vignetting correction related)
- Modified param_depend.h rev1.2 - added 17 lines, removed 6 lines
[elphel353-7.2] By elphel: modified control register to have independent control of bit groups, no need to read old value/maintain shadow
elphel committed changes to the Elphel project elphel353-7.2 CVS:
modified control register to have independent control of bit groups, no need to read old value/maintain shadow
modified control register to have independent control of bit groups, no need to read old value/maintain shadow
- Modified control_regs.v rev1.1 - added none, removed none
- Modified i2c_writeonly.v rev1.3 - added 29 lines, removed 9 lines
- Modified ioports353.v rev1.3 - added 25 lines, removed 20 lines
- Modified x353.par rev1.7 - added 83 lines, removed 73 lines
- Modified x353.syr rev1.7 - added 1647 lines, removed 1628 lines
- Modified x353.v rev1.5 - added 67 lines, removed 17 lines
- Modified x353_1.sav rev1.7 - added 43 lines, removed 35 lines
- Modified x353_1.tf rev1.7 - added 23 lines, removed 4 lines
- Modified x353_export.tcl rev1.2 - added 2 lines, removed one line
- Modified x353_import.tcl rev1.4 - added 2 lines, removed none
- Modified x353_map.mrp rev1.7 - added 51 lines, removed 57 lines
- Modified x353_pad.txt rev1.7 - added one line, removed one line
- Modified x353_sim.sh rev1.2 - added one line, removed none
[elphel353-7.1] By dzhimiev: 1. mcontr address range changed from 0x0820-0x082F to 0x0840-0x085F - for making extra channels
dzhimiev committed changes to the Elphel project elphel353-7.1 CVS:
1. mcontr address range changed from 0x0820-0x082F to 0x0840-0x085F - for making extra channels
1. mcontr address range changed from 0x0820-0x082F to 0x0840-0x085F - for making extra channels
- Modified mem_test.php rev1.3 - added 21 lines, removed 38 lines
- Modified sensors_init.php rev1.3 - added 5 lines, removed one line
- Modified tests_for_96mhz.php rev1.4 - added 38 lines, removed 30 lines
[elphel353-7.1] By dzhimiev: 1. mcontr address range changed from 0x0820-0x082F to 0x0840-0x085F - for making extra channels...
dzhimiev committed changes to the Elphel project elphel353-7.1 CVS:
1. mcontr address range changed from 0x0820-0x082F to 0x0840-0x085F - for making extra channels 2. added 1 readout channel for 3rd sensor 3. 3 sensors supported
1. mcontr address range changed from 0x0820-0x082F to 0x0840-0x085F - for making extra channels 2. added 1 readout channel for 3rd sensor 3. 3 sensors supported
- Modified descrproc353.v rev1.2 - added 61 lines, removed 50 lines
- Modified mcontr359.v rev1.4 - added 295 lines, removed 171 lines
- Modified sdseq353.v rev1.2 - added 10 lines, removed 34 lines
- Modified x359.bit rev1.5 - added 536 lines, removed 348 lines
- Modified x359.par rev1.5 - added 107 lines, removed 82 lines
- Modified x359.syr rev1.5 - added 1491 lines, removed 1090 lines
- Modified x359.tf rev1.3 - added 37 lines, removed 183 lines
- Modified x359.ucf rev1.3 - added 11 lines, removed 11 lines
- Modified x359.v rev1.7 - added 387 lines, removed 156 lines
- Modified x359_map.mrp rev1.5 - added 807 lines, removed 279 lines
- Modified x359_pad.txt rev1.5 - added 8 lines, removed 8 lines
- Modified x359_sim.sh rev1.3 - added one line, removed one line
[fpga] By dzhimiev: mcontr address range changed from 0x0820-0x082F to 0x0840-0x085F (for making extra channels)
dzhimiev committed changes to the Elphel project fpga CVS:
mcontr address range changed from 0x0820-0x082F to 0x0840-0x085F (for making extra channels)
mcontr address range changed from 0x0820-0x082F to 0x0840-0x085F (for making extra channels)
- Modified mem_read.php rev1.2 - added none, removed none
- Modified mem_test.php rev1.2 - added 21 lines, removed 38 lines
- Modified phases_adjust.php rev1.2 - added one line, removed one line
- Modified reg_write.php rev1.2 - added none, removed none
- Modified switch_channel.php rev1.2 - added 28 lines, removed 28 lines
- Modified tests_for_96mhz.php rev1.3 - added 38 lines, removed 30 lines
- Modified trigger_mode_init.php rev1.2 - added none, removed none
[elphel353-7.2] By elphel: work in progress, intermediate commit
elphel committed changes to the Elphel project elphel353-7.2 CVS:
work in progress, intermediate commit
work in progress, intermediate commit
- Modified src.list rev1.6 - added 6 lines, removed none
- Modified Makefile rev1.4 - added one line, removed none
- Modified cc353.c rev1.6 - added 13 lines, removed 92 lines
- Modified fpga_sdram353.c rev1.2 - added 12 lines, removed 19 lines
- Modified framepars.h rev1.3 - added 13 lines, removed 3 lines
- Modified gamma_tables.c rev1.3 - added 27 lines, removed 17 lines
- Modified gamma_tables.h rev1.3 - added 14 lines, removed one line
- Modified histograms.c rev1.3 - added 3 lines, removed 53 lines
- Modified sensor_common.h rev1.1 - added none, removed none
- Modified x353.h rev1.6 - added 31 lines, removed 94 lines
[elphel353-7.2] By elphel: additional test to prevent "JUST_THIS" parameters to be written to the future-most frame (otherwise it can get stuck)
elphel committed changes to the Elphel project elphel353-7.2 CVS:
additional test to prevent "JUST_THIS" parameters to be written to the future-most frame (otherwise it can get stuck)
additional test to prevent "JUST_THIS" parameters to be written to the future-most frame (otherwise it can get stuck)
- Modified framepars.c rev1.4 - added 32 lines, removed 4 lines
[elphel353-7.2] By elphel: snapshot
elphel committed changes to the Elphel project elphel353-7.2 CVS:
snapshot
snapshot
- Modified param_depend.h rev1.1 - added 4 lines, removed one line
[elphel353-7.2] By elphel: removed cc353.c, cc353.h
elphel committed changes to the Elphel project elphel353-7.2 CVS:
removed cc353.c, cc353.h
removed cc353.c, cc353.h
- Modified sensor_common.c rev1.1 - added 4 lines, removed one line
[elphel353-7.2] By elphel: added several more parameters related no ccamftp.php
elphel committed changes to the Elphel project elphel353-7.2 CVS:
added several more parameters related no ccamftp.php
added several more parameters related no ccamftp.php
- Modified c313a.h rev1.5 - added 11 lines, removed none
[elphel353-7.2] By elphel: changed memory SDRAM enable controls
elphel committed changes to the Elphel project elphel353-7.2 CVS:
changed memory SDRAM enable controls
changed memory SDRAM enable controls
- Modified descrproc353.v rev1.3 - added 23 lines, removed 5 lines
- Modified x353.bit rev1.6 - added 1451 lines, removed 1103 lines
- Modified x353.par rev1.6 - added 80 lines, removed 94 lines
- Modified x353.syr rev1.6 - added 1579 lines, removed 1576 lines
- Modified x353.v rev1.4 - added 2 lines, removed one line
- Modified x353_1.sav rev1.6 - added 43 lines, removed 19 lines
- Modified x353_1.tf rev1.6 - added 48 lines, removed 6 lines
- Modified x353_map.mrp rev1.6 - added 48 lines, removed 48 lines
- Modified x353_pad.txt rev1.6 - added one line, removed one line
[fpga] By jlarrey: Back with 353 interrupts, simulation seems to work
jlarrey committed changes to the Elphel project fpga CVS:
Back with 353 interrupts, simulation seems to work
Back with 353 interrupts, simulation seems to work
- Modified __ISE_repository_x353t.ise_.lock rev1.2 - added none, removed none
- Modified dc_predict.v rev1.2 - added 39 lines, removed 34 lines
- Modified dma_fifo353.v rev1.2 - added none, removed none
- Modified encoderDCAC333.v rev1.2 - added none, removed none
- Modified ioports353.v rev1.4 - added 3 lines, removed one line
- Modified mcontr_8chn.v rev1.3 - added 10 lines, removed 4 lines
- Modified pxdpath.sav rev1.2 - added none, removed none
- Modified reorder_hilbert.v rev1.2 - added one line, removed one line
- Modified sdseq353.v rev1.2 - added none, removed none
- Modified sensor12bits.v rev1.4 - added 3 lines, removed 3 lines
- Modified sensorpix353.v rev1.3 - added 26 lines, removed 10 lines
- Modified sensorpix353t.v rev1.3 - added none, removed none
- Modified x353.ucf rev1.2 - added none, removed none
- Modified x353.v rev1.4 - added 56 lines, removed 19 lines
- Modified x353_1.tf rev1.2 - added none, removed none
- Modified x353_1.v rev1.2 - added none, removed none
- Modified x353_1tasks.tf rev1.2 - added none, removed none
- Modified x353_347_1.tf rev1.2 - added none, removed none
- Modified x353_347_sim.sh rev1.2 - added none, removed none
- Modified x353_import.tcl rev1.2 - added none, removed none
- Modified x353_sim.sh rev1.3 - added one line, removed 2 lines
- Modified x353_sta.v rev1.2 - added none, removed none
- Modified x353_summary.html rev1.2 - added none, removed none
- Modified x353t.ise rev1.2 - added none, removed none
- Modified x353t.ise_ISE_Backup rev1.2 - added none, removed none
- Modified x353t.restore rev1.2 - added none, removed none
- Modified x353t.tf rev1.8 - added 65 lines, removed 66 lines
- Modified x353t_tasks.tf rev1.5 - added none, removed 7 lines
[elphel353-7.2] By elphel: rearranged initialization, added frame number reset (to avoid unlikely integer overflow)
elphel committed changes to the Elphel project elphel353-7.2 CVS:
rearranged initialization, added frame number reset (to avoid unlikely integer overflow)
rearranged initialization, added frame number reset (to avoid unlikely integer overflow)
- Modified framepars.c rev1.3 - added 30 lines, removed 49 lines
[elphel353-7.2] By elphel: additional test to prevent "JUST_THIS" parameters to be written to the future-most frame (otherwise it can get stuck)
elphel committed changes to the Elphel project elphel353-7.2 CVS:
additional test to prevent "JUST_THIS" parameters to be written to the future-most frame (otherwise it can get stuck)
additional test to prevent "JUST_THIS" parameters to be written to the future-most frame (otherwise it can get stuck)
- Modified framepars.h rev1.2 - added 2 lines, removed none
Pages
