[elphel353-8.0] By spectr_rain: Unfortunately spectr_rain was too busy to leave any commit message
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
Unfortunately spectr_rain was too busy to leave any commit message
Unfortunately spectr_rain was too busy to leave any commit message
- Modified configure_elphel rev1.2 - added lines, removed lines
[elphel353-8.0] By spectr_rain: Unfortunately spectr_rain was too busy to leave any commit message
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
Unfortunately spectr_rain was too busy to leave any commit message
Unfortunately spectr_rain was too busy to leave any commit message
- Modified configure_elphel rev1.2 - added lines, removed lines
[elphel353-8.0] By spectr_rain: Unfortunately spectr_rain was too busy to leave any commit message
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
Unfortunately spectr_rain was too busy to leave any commit message
Unfortunately spectr_rain was too busy to leave any commit message
- Modified simple_abst.c rev1.2 - added lines, removed lines
[elphel353-8.0] By spectr_rain: removed deprecated ALSA
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
removed deprecated ALSA
removed deprecated ALSA
- Modified src.list rev1.40 - added 3 lines, removed 15 lines
[elphel353-8.0] By spectr_rain: Unfortunately spectr_rain was too busy to leave any commit message
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
Unfortunately spectr_rain was too busy to leave any commit message
Unfortunately spectr_rain was too busy to leave any commit message
- Modified Makefile rev1.2 - added lines, removed lines
[elphel353-8.0] By spectr_rain: Unfortunately spectr_rain was too busy to leave any commit message
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
Unfortunately spectr_rain was too busy to leave any commit message
Unfortunately spectr_rain was too busy to leave any commit message
- Modified Makefile rev1.2 - added lines, removed lines
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command); cam be used on the camera with script reflash as 'reflash rw'
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command); cam be used on the camera with script reflash as 'reflash rw'
- Modified reflash rev1.3 - added 5 lines, removed one line
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
- Modified README.flash rev1.3 - added 4 lines, removed one line
- Modified pt_split rev1.3 - added 51 lines, removed 16 lines
- Modified nfs_update rev1.12 - added 57 lines, removed 4 lines
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
- Modified README.flash rev1.3 - added 4 lines, removed one line
- Modified pt_split rev1.3 - added 51 lines, removed 16 lines
- Modified nfs_update rev1.12 - added 57 lines, removed 4 lines
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
- Modified README.flash rev1.3 - added 4 lines, removed one line
- Modified pt_split rev1.3 - added 51 lines, removed 16 lines
- Modified nfs_update rev1.12 - added 57 lines, removed 4 lines
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
- Modified README.flash rev1.3 - added 4 lines, removed one line
- Modified pt_split rev1.3 - added 51 lines, removed 16 lines
- Modified nfs_update rev1.12 - added 57 lines, removed 4 lines
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
- Modified README.flash rev1.3 - added 4 lines, removed one line
- Modified pt_split rev1.3 - added 51 lines, removed 16 lines
- Modified nfs_update rev1.12 - added 57 lines, removed 4 lines
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
- Modified README.flash rev1.3 - added 4 lines, removed one line
- Modified pt_split rev1.3 - added 51 lines, removed 16 lines
- Modified nfs_update rev1.12 - added 57 lines, removed 4 lines
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
- Modified README.flash rev1.3 - added 4 lines, removed one line
- Modified pt_split rev1.3 - added 51 lines, removed 16 lines
- Modified nfs_update rev1.12 - added 57 lines, removed 4 lines
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
- Modified README.flash rev1.3 - added 4 lines, removed one line
- Modified pt_split rev1.3 - added 51 lines, removed 16 lines
- Modified nfs_update rev1.12 - added 57 lines, removed 4 lines
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
- Modified README.flash rev1.3 - added 4 lines, removed one line
- Modified pt_split rev1.3 - added 51 lines, removed 16 lines
- Modified nfs_update rev1.12 - added 57 lines, removed 4 lines
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
- Modified README.flash rev1.3 - added 4 lines, removed one line
- Modified pt_split rev1.3 - added 51 lines, removed 16 lines
- Modified nfs_update rev1.12 - added 57 lines, removed 4 lines
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
- Modified README.flash rev1.3 - added 4 lines, removed one line
- Modified pt_split rev1.3 - added 51 lines, removed 16 lines
- Modified nfs_update rev1.12 - added 57 lines, removed 4 lines
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
- Modified README.flash rev1.3 - added 4 lines, removed one line
- Modified pt_split rev1.3 - added 51 lines, removed 16 lines
- Modified nfs_update rev1.12 - added 57 lines, removed 4 lines
[elphel353-8.0] By spectr_rain: new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after...
spectr_rain committed changes to the Elphel project elphel353-8.0 CVS:
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
new command 'rw' to update firmware with images stored from NFS server at flash on the camera, and boot block will be erased and then restored at finish, or if reflashing failed, camera will start in netboot mode after power off/on, so boot block will be restored at the next reflashing with 'rw' command)
- Modified README.flash rev1.3 - added 4 lines, removed one line
- Modified pt_split rev1.3 - added 51 lines, removed 16 lines
- Modified nfs_update rev1.12 - added 57 lines, removed 4 lines
Pages
