Andrey Filippov (97346989) at 11 Jul 08:48 more debugging

Andrey Filippov (fe15d689) at 11 Jul 08:47 added single write thread option

Andrey Filippov (8040cfa1) at 10 Jul 16:50 naming bug

Andrey Filippov (d5901897) at 10 Jul 07:24 correctly processing split files, modified filenames for sorting

Added A-D description

← Older revision Revision as of 20:02, 9 July 2023 (One intermediate revision by the same user not shown)Line 19: Line 19:  Connector provides high-current (up to 0.5A) dc-coupled 5V output and optoisolated I/O. When optoisolated pair is used used as an input (common use), external signal is applied between XSYNC1 (+) and XSYNC2(-). When the pair is used as an output (less common), external 5V power source should be connected in series with the receiver and 103891, so that "+" will be applied to XSYNC2, and "-" - to XSYNC1 (opposite to the input mode). Details are available in the circuit diagram of the [[10389]] board. Connector provides high-current (up to 0.5A) dc-coupled 5V output and optoisolated I/O. When optoisolated pair is used used as an input (common use), external signal is applied between XSYNC1 (+) and XSYNC2(-). When the pair is used as an output (less common), external 5V power source should be connected in series with the receiver and 103891, so that "+" will be applied to XSYNC2, and "-" - to XSYNC1 (opposite to the input mode). Details are available in the circuit diagram of the [[10389]] board.    −Output synchronization can be just a pulse or carry additional timestamp data when used to synchronize multiple NC393 cameras. See [[Trigger_393]] for the settings.+Output synchronization can be just a pulse or carry additional timestamp data when used to synchronize multiple NC393 cameras. See [[Trigger_393]] for the settings. Pin A is the tip, B - next, then C and D is the closest to the connector housing.  {| class='wikitable' {| class='wikitable'  |+Connector pinout |+Connector pinout Line 28: Line 28:  |- |-  |XSYNC1 |XSYNC1 −|1+|1 (D)  |black |black  |optoisolated, "+" input with respect to XSYNC2 |optoisolated, "+" input with respect to XSYNC2  |- |-  |SYNC_DRV |SYNC_DRV −|2+|2 (A)  |red |red  |Sync output (DC-coupled), +5V pulses with respect to GND |Sync output (DC-coupled), +5V pulses with respect to GND  |- |-  |GND |GND −|3+|3 (B)  |white |white  |Output reference, connected to the camera system ground |Output reference, connected to the camera system ground  |- |-  |XSYNC2 |XSYNC2 −|4+|4 (C)  |green |green  |optoisolated, "-" input with respect to XSYNC1 |optoisolated, "-" input with respect to XSYNC1 Andrey.filippov

Andrey Filippov (67643efd) at 08 Jul 20:00 Start/restart behavior, more of relevant status output

Andrey Filippov (edaa3147) at 08 Jul 19:59 More status from camogm, timing of debug messages, start record beh...

Andrey Filippov (65d58636) at 08 Jul 19:58 modified "cmd=start" behavior

Andrey Filippov (2be574ef) at 08 Jul 05:49 Updating to match camogm behavior

Andrey Filippov (5a1a4d6f) at 05 Jul 18:11 removed excessive killall polluting log and more debugging multicam...

Andrey Filippov (eb2f643e) at 05 Jul 18:10 making resilient against restarting camogm and incrementing state f...

Andrey Filippov (9389820e) at 04 Jul 22:46 more debugging

Andrey Filippov (56fe52f2) at 04 Jul 19:02 fixed typo

Andrey Filippov (997be073) at 04 Jul 19:01 debugging, tested status files fro raw recording

Andrey Filippov (3ed8b3eb) at 04 Jul 19:00 intermediate working versio with debug enabled

Andrey Filippov (5d1ca452) at 02 Jul 22:13 changed set_prefix to set_prefix_raw

Andrey Filippov (c78bbfc2) at 02 Jul 21:53 added named camog.disk copies for navigation

Andrey Filippov (c07862e5) at 02 Jul 01:12 started *3 version

Andrey Filippov (01b565e2) at 01 Jul 17:04 edited for EO, restored write camogm.disk to /dev/sda1

Andrey Filippov (d3ca86d1) at 29 Jun 21:31 more debugging, duplicated/edited kernel files