Mikhail Karpenko committed changes to the Elphel git project :
Fix incorrect mapping of splitted frame

Mikhail Karpenko committed changes to the Elphel git project :
WIP: Write aligned frames to block device

← Older revision Revision as of 18:23, 29 March 2017 (One intermediate revision by the same user not shown)Line 1: Line 1:  ===Setup environment=== ===Setup environment=== −[[Poky_2.0_manual#Setup|Instructions]]+Get sources and build default images: [[Poky_2.0_manual#Setup|Instructions]]  +   ===Flash vs micro SD=== ===Flash vs micro SD===  * micro SD cards work best for development * micro SD cards work best for development Line 10: Line 11:  ** limited write cycles ** limited write cycles  ** because of overlayfs changes need an extra sync (overlay_sync) and a proper reboot to get written to the flash. ** because of overlayfs changes need an extra sync (overlay_sync) and a proper reboot to get written to the flash.  +  +===Environment tree===  +<font size='2'>  + '''elphel393'''  + ├── '''bootable-images -> poky/build/tmp/deploy/images/elphel393/''' - poky generated boot images  + ├── '''fpga-elphel''' - fpga projects, matching recipes are in ''meta/meta-elphel393/recipes-core/''  + │   ├── '''x359'''  + │   ├── '''x393'''  + │   └── '''x393_sata'''  + ├── '''linux-elphel''' - kernel - a kernel tree with Elphel's sources only - it is merged with the full kernel tree  + ├── '''meta''' - extra recipe layers for poky  + │   ├── '''meta-elphel393''' - Elphel's recipes: fpga, device tree, kernel and applications, lots of bbappends  + │   ├── '''meta-ezynq''' - Elphel's recipes for u-boot  + │   ├── '''meta-openembedded''' - recipes (like PHP) that were not included in poky 2.0  + │   ├── '''meta-swupdate''' - swupdate recipes (not yet used)  + │   └── '''meta-xilinx''' - Xilinx's recipes, help to build kernel and device tree  + ├── '''poky''' - poky tree  + │   ├── '''build'''  + │   │   └── '''conf'''  + │   │      ├── '''bblayers.conf''' - paths to extra layers (generated by setup.py)  + │   │      └── <font color='red'>'''local.conf'''</font> - have a look inside, local configuration (generated by setup.py)  + │   └── '''meta''' - poky's recipes  + ├── '''rootfs-elphel''' - user applicatons projects and init scripts, matching recipes are found in ''meta/meta-elphel393/recipes-core/''  + │   ├── '''elphel-apps-autocampars''' - camera parameters manager - setup, store/restore, set default  + │   ├── '''elphel-apps-autoexposure''' - autoexposure daemon  + │   ├── '''elphel-apps-camogm''' - recorder program  + │   ├── '''elphel-apps-editconf'''  + │   ├── '''elphel-apps-gps''' - gps receiver application  + │   ├── '''elphel-apps-histograms''' - histograms  + │   ├── '''elphel-apps-imgsrv''' - image server  + │   ├── '''elphel-apps-php-extension''' - php functions, compiled as a php extension (part of php recipe)  + │   ├── '''elphel-apps-tempmon''' - temperature monitor  + │   ├── '''elphel-init''' - system init script  + │   ├── '''elphel-udev-rules''' - udev rules: drive automount  + │   ├── '''elphel-web-393''' - web GUIs  + │   ├── '''elphel-web-camvc''' - main control GUI, ported from 353  + │   └── '''elphel-web-hwmon''' - hardware monitor  + └── '''tools'''  +    └── '''elphel-tools-update''' - useful scripts, e.g. create bootable mmc     ===Kernel=== ===Kernel=== Oleg

‎Environment tree

← Older revision Revision as of 23:45, 28 March 2017 (5 intermediate revisions by the same user not shown)Line 100: Line 100:  '''Notes:'''   '''Notes:'''    * '''deployed''' = running on the target system * '''deployed''' = running on the target system  +  +{|  +|[[File:Check versions.png|thumb|400px|check_versions.py output in terminal]]  +|}     ==<font color="blue">Build</font>== ==<font color="blue">Build</font>== Line 145: Line 149:  * '''rootfs.tar.gz''' * '''rootfs.tar.gz'''  * '''rootfs.ubi''','''rootfs.ubifs''' * '''rootfs.ubi''','''rootfs.ubifs'''  +  +==<font color="blue">Environment tree</font>==  +===top project===  +* [https://git.elphel.com/Elphel/elphel393.git elphel393.git]  +  +{| class='wikitable'  +!file  +!description  +|-  +| '''projects-default.json'''  +|  +* list of cloned repositories and tree structure  +* copy of this file makes a working copy - '''projects.json'''  +|-  +| '''setup.py'''  +|  +* creates a working copy from default and parses the contents  +* rerun to update all repositories - then rebuild using bitbake  +* generates a default ''local.conf'' for poky pre-configured for 10393  +|-  +| '''check_versions.py'''  +| local repository vs running on target hardware version checker  +|}  +  +===default paths===  +<font size='2'>  + '''elphel393'''  + ├── '''bootable-images -> poky/build/tmp/deploy/images/elphel393/''' - poky generated boot images  + ├── '''fpga-elphel''' - fpga projects, matching recipes are in ''meta/meta-elphel393/recipes-core/''  + │   ├── '''x359'''  + │   ├── '''x393'''  + │   └── '''x393_sata'''  + ├── '''linux-elphel''' - kernel - a kernel tree with Elphel's sources only - it is merged with the full kernel tree  + ├── '''meta''' - extra recipe layers for poky  + │   ├── '''meta-elphel393''' - Elphel's recipes: fpga, device tree, kernel and applications, lots of bbappends  + │   ├── '''meta-ezynq''' - Elphel's recipes for u-boot  + │   ├── '''meta-openembedded''' - recipes (like PHP) that were not included in poky 2.0  + │   ├── '''meta-swupdate''' - swupdate recipes (not yet used)  + │   └── '''meta-xilinx''' - Xilinx's recipes, help to build kernel and device tree  + ├── '''poky''' - poky tree  + │   ├── '''build'''  + │   │   └── '''conf'''  + │   │      ├── '''bblayers.conf''' - paths to extra layers (generated by setup.py)  + │   │      └── <font color='red'>'''local.conf'''</font> - have a look inside, local configuration (generated by setup.py)  + │   └── '''meta''' - poky's recipes  + ├── '''rootfs-elphel''' - user applicatons projects and init scripts, matching recipes are found in ''meta/meta-elphel393/recipes-core/''  + │   ├── '''elphel-apps-autocampars''' - camera parameters manager - setup, store/restore, set default  + │   ├── '''elphel-apps-autoexposure''' - autoexposure daemon  + │   ├── '''elphel-apps-camogm''' - recorder program  + │   ├── '''elphel-apps-editconf'''  + │   ├── '''elphel-apps-gps''' - gps receiver application  + │   ├── '''elphel-apps-histograms''' - histograms  + │   ├── '''elphel-apps-imgsrv''' - image server  + │   ├── '''elphel-apps-php-extension''' - php functions, compiled as a php extension (part of php recipe)  + │   ├── '''elphel-apps-tempmon''' - temperature monitor  + │   ├── '''elphel-init''' - system init script  + │   ├── '''elphel-udev-rules''' - udev rules: drive automount  + │   ├── '''elphel-web-393''' - web GUIs  + │   ├── '''elphel-web-camvc''' - main control GUI, ported from 353  + │   └── '''elphel-web-hwmon''' - hardware monitor  + └── '''tools'''  +    └── '''elphel-tools-update''' - useful scripts, e.g. create bootable mmc  +  +===project structure (example: elphel-init)===  +====recipe====  + elphel393/meta/meta-elphel393/recipes-core/init/init_1.0.bb  +  +'''Note:''' The recipe and the project sources are in different repos  +  +====in repository====  + rootfs-elphel/elphel-init/  + ├── eclipse_project_setup  + ├── LICENSE  + ├── Makefile  + ├── README.md  + ├── run_bitbake.sh  + ├── src  + │   ├── init_elphel393  + │   ├── init_elphel393.py  + │   ├── init_elphel393.sh  + │   ├── init_eyesis12.sh  + │   ├── init_eyesis_bottom2.sh  + │   └── Makefile  + └── VERSION  +  +====after building====  + rootfs-elphel/elphel-init/  + ├── <font color='green'>bitbake-logs -> /.../elphel393/poky/build/tmp/work/cortexa9-neon-poky-linux-gnueabi/init/1_0-60/temp</font>  + ├── eclipse_project_setup  + ├── <font color='green'>image -> /.../elphel393/poky/build/tmp/work/cortexa9-neon-poky-linux-gnueabi/init/1_0-60/image</font>  + ├── LICENSE  + ├── Makefile  + ├── README.md  + ├── run_bitbake.sh  + ├── src  + │   ├── init_elphel393  + │   ├── init_elphel393.py  + │   ├── init_elphel393.sh  + │   ├── init_eyesis12.sh  + │   ├── init_eyesis_bottom2.sh  + │   └── Makefile  + ├── <font color='green'>sysroots -> /home/oleg/GIT/elphel393_fixold/poky/build/tmp/sysroots</font>  + └── VERSION  +  +</font>     ==<font color="blue">Notes</font>== ==<font color="blue">Notes</font>== Oleg

← Older revision Revision as of 22:33, 28 March 2017 (One intermediate revision by the same user not shown)Line 100: Line 100:  '''Notes:'''   '''Notes:'''    * '''deployed''' = running on the target system * '''deployed''' = running on the target system  +  +{|  +|[[File:Check versions.png|thumb|400px|check_versions.py output in terminal]]  +|}     ==<font color="blue">Build</font>== ==<font color="blue">Build</font>== Line 145: Line 149:  * '''rootfs.tar.gz''' * '''rootfs.tar.gz'''  * '''rootfs.ubi''','''rootfs.ubifs''' * '''rootfs.ubi''','''rootfs.ubifs'''  +  +==<font color="blue">Environment tree</font>==  +===top project===  +* [https://git.elphel.com/Elphel/elphel393.git elphel393.git]  +  +{| class='wikitable'  +!file  +!description  +|-  +| '''projects-default.json'''  +|  +* list of cloned repositories and tree structure  +* copy of this file makes a working copy - '''projects.json'''  +|-  +| '''setup.py'''  +|  +* creates a working copy from default and parses the contents  +* rerun to update all repositories - then rebuild using bitbake  +* generates a default local.conf for poky pre-configured for 10393  +|-  +| '''check_versions.py'''  +| local repository vs running on target hardware version checker  +|}  +     ==<font color="blue">Notes</font>== ==<font color="blue">Notes</font>== Oleg

‎Compare built vs deployed software versions

← Older revision Revision as of 20:50, 28 March 2017 Line 100: Line 100:  '''Notes:'''   '''Notes:'''    * '''deployed''' = running on the target system * '''deployed''' = running on the target system  +  +{|  +|[[File:Check versions.png|thumb|400px|check_versions.py output in terminal]]  +|}     ==<font color="blue">Build</font>== ==<font color="blue">Build</font>== Oleg

Oleg uploaded File:Check versions.png

New page

== Licensing ==
{{CC }} Oleg

← Older revision Revision as of 20:42, 28 March 2017 (One intermediate revision by the same user not shown)Line 1: Line 1:  ===Setup environment=== ===Setup environment=== − +[[Poky_2.0_manual#Setup|Instructions]]  ===Flash vs micro SD=== ===Flash vs micro SD===  * micro SD cards work best for development * micro SD cards work best for development Oleg

Created page with "===Setup environment=== ===Flash vs micro SD=== * micro SD cards work best for development ** replaceable ** changes get written to the card, no extra sync required * flash..."

New page

===Setup environment===

===Flash vs micro SD===
* micro SD cards work best for development
** replaceable
** changes get written to the card, no extra sync required

* flash works best for a production system:
** non-replaceable
** limited write cycles
** because of overlayfs changes need an extra sync (overlay_sync) and a proper reboot to get written to the flash.

===Kernel===

===Applications===

===Projects structure===


[[Category:393]] Oleg

AndreyFilippov committed changes to the Elphel git project :
deleted already moved code

AndreyFilippov committed changes to the Elphel git project :
extracted classes to separate files

‎Compile devicetree

← Older revision Revision as of 20:01, 28 March 2017 (7 intermediate revisions by the same user not shown)Line 60: Line 60:  * '''rootfs.ubifs''', '''rootfs.ubi''', '''rootfs.tar.gz''' - rootfs in different formats * '''rootfs.ubifs''', '''rootfs.ubi''', '''rootfs.tar.gz''' - rootfs in different formats    −They are found poky's deploy directory '''elphel393/poky/build/tmp/deploy/images/elphel393/''', linked to+They are found at '''elphel393/bootable-images/''', which is a link (for convenience) to poky's deploy directory '''elphel393/poky/build/tmp/deploy/images/elphel393/''' −'''elphel393/bootable-images/''' for convenience.      * complete set of files for rootfs in NAND Flash: ''elphel393/bootable-images/nand/'' * complete set of files for rootfs in NAND Flash: ''elphel393/bootable-images/nand/'' Line 81: Line 80:     ==<font color="blue">Setup</font>== ==<font color="blue">Setup</font>== −*    <font size='2'> <font size='2'>    git clone https://git.elphel.com/Elphel/elphel393.git   git clone https://git.elphel.com/Elphel/elphel393.git Line 91: Line 89:  </font> </font>    −==<font color="blue">Compare '''built''' vs '''running on target system''' software</font>==+'''Notes:''' −*+* The last line builds all targets.  +   +==<font color="blue">Compare '''built''' vs '''deployed''' software versions</font>==  <font size='2'> <font size='2'>    cd elphel393   cd elphel393 Line 98: Line 98:  </font> </font>    −==<font color="blue">Build bootloader</font>==+'''Notes:'''  +* '''deployed''' = running on the target system  +   +==<font color="blue">Build</font>==  +   +===<font color="blue">All targets</font>===  + bitbake u-boot device-tree linux-xlnx core-image-elphel393  +   +===<font color="blue">Bootloader</font>===  <font size='2'> <font size='2'> − bitbake u-boot-ezynq  − or     bitbake u-boot   bitbake u-boot − or  − bitbake virtual/bootloader   </font> </font>  ====Output==== ====Output==== Line 111: Line 115:     ====Notes==== ====Notes==== −* Since Poky 1.5.1 switched from u-boot-xlnx to u-boot - some of the u-boot-xlnx reached the upstream+* Since Poky 1.5.1: switched from u-boot-xlnx to u-boot - some of the u-boot-xlnx reached the upstream −* Since Poky 1.5.1 u-boot introduced Kconfig and currently (as of 2016/01/22) is still migrating from autoconf - keeping both build methods working together.+* Since Poky 1.5.1: u-boot introduced Kconfig and currently (as of 2016/01/22) is still migrating from autoconf - keeping both build methods working together.  * Current u-boot uses the board's device tree blob to make a stripped version for itself - uncompiled device tree files are present in the u-boot sources * Current u-boot uses the board's device tree blob to make a stripped version for itself - uncompiled device tree files are present in the u-boot sources    −==<font color="blue">Compile devicetree</font>==+===<font color="blue">Device tree</font>===  <font size='2'> <font size='2'>    bitbake device-tree   bitbake device-tree Line 122: Line 126:  * '''devicetree.dtb''' * '''devicetree.dtb'''    −==<font color="blue">Build kernel</font>==+===<font color="blue">Kernel</font>===  <font size='2'> <font size='2'>    bitbake linux-xlnx   bitbake linux-xlnx − or  − bitbake virtual/kernel   </font> </font>  ====Output==== ====Output==== Line 136: Line 138:  * Uncompiled device tree files are present in the linux sources provided by linux-xlnx * Uncompiled device tree files are present in the linux sources provided by linux-xlnx    −==<font color="blue">Build ramdisk.image.gz</font>==+===<font color="blue">Rootfs</font>===  <font size='2'> <font size='2'>    bitbake core-image-elphel393   bitbake core-image-elphel393  </font> </font>  ====Output==== ====Output==== −* '''uramdisk.image.gz''' (the file has *.u-boot extension after it's built)+* '''rootfs.tar.gz''' −* '''rootfs.ubi'''+* '''rootfs.ubi''','''rootfs.ubifs''' −* '''rootfs.ubifs'''      ==<font color="blue">Notes</font>== ==<font color="blue">Notes</font>== Oleg

‎Build kernel

← Older revision Revision as of 19:40, 28 March 2017 (4 intermediate revisions by the same user not shown)Line 81: Line 81:     ==<font color="blue">Setup</font>== ==<font color="blue">Setup</font>== −*    <font size='2'> <font size='2'>    git clone https://git.elphel.com/Elphel/elphel393.git   git clone https://git.elphel.com/Elphel/elphel393.git Line 92: Line 91:     ==<font color="blue">Compare '''built''' vs '''running on target system''' software</font>== ==<font color="blue">Compare '''built''' vs '''running on target system''' software</font>== −*   <font size='2'> <font size='2'>    cd elphel393   cd elphel393 Line 100: Line 98:  ==<font color="blue">Build bootloader</font>== ==<font color="blue">Build bootloader</font>==  <font size='2'> <font size='2'> − bitbake u-boot-ezynq  − or     bitbake u-boot   bitbake u-boot − or  − bitbake virtual/bootloader   </font> </font>  ====Output==== ====Output==== Line 111: Line 105:     ====Notes==== ====Notes==== −* Since Poky 1.5.1 switched from u-boot-xlnx to u-boot - some of the u-boot-xlnx reached the upstream+* Since Poky 1.5.1: switched from u-boot-xlnx to u-boot - some of the u-boot-xlnx reached the upstream −* Since Poky 1.5.1 u-boot introduced Kconfig and currently (as of 2016/01/22) is still migrating from autoconf - keeping both build methods working together.+* Since Poky 1.5.1: u-boot introduced Kconfig and currently (as of 2016/01/22) is still migrating from autoconf - keeping both build methods working together.  * Current u-boot uses the board's device tree blob to make a stripped version for itself - uncompiled device tree files are present in the u-boot sources * Current u-boot uses the board's device tree blob to make a stripped version for itself - uncompiled device tree files are present in the u-boot sources    Line 125: Line 119:  <font size='2'> <font size='2'>    bitbake linux-xlnx   bitbake linux-xlnx − or  − bitbake virtual/kernel   </font> </font>  ====Output==== ====Output==== Oleg

‎Stop

← Older revision Revision as of 01:59, 28 March 2017 (5 intermediate revisions by the same user not shown)Line 42: Line 42:    Important Notice: Use a fan to cool the camera's pole when shooting indoors.   Important Notice: Use a fan to cool the camera's pole when shooting indoors.  </b> </b>  +{|  +|[[File:Eyesis4pi393 gui access.png|thumb|500px|GUI access]]  +|}  +  <br/><br/> <br/><br/>    Line 187: Line 191:     <br> <br>  +  +== Troubleshooting ==  +  <!-- <!--  == Downloading IMU/GPS Log == == Downloading IMU/GPS Log == Line 205: Line 212:  '''''Note:''' Missing files most likely means that the FPS is too high''.   '''''Note:''' Missing files most likely means that the FPS is too high''.    --> -->  +  == Links == == Links ==    Oleg

Oleg uploaded File:Eyesis4pi393 gui access.png

New page

== Licensing ==
{{CC }} Oleg

Oleg Dzhimiev committed changes to the Elphel git project :
free space refresh when not recording

‎Power On

← Older revision Revision as of 01:06, 28 March 2017 (2 intermediate revisions by the same user not shown)Line 6: Line 6:    git clone https://git.elphel.com/Elphel/eyesis4pi-393-gui.git   git clone https://git.elphel.com/Elphel/eyesis4pi-393-gui.git    git pull (repeat any time to get the latest)   git pull (repeat any time to get the latest) −GitHub.com:+https://git.elphel.com: −  https://github.com/Elphel/eyesis4pi-393-gui+  https://git.elphel.com/Elphel/eyesis4pi-393-gui/tree/master     Follow the instructions in INSTALL.txt: Follow the instructions in INSTALL.txt: Line 33: Line 33:  == Power On == == Power On ==    −* Connect the camera's ethernet cables to the switch.+* Connect all cables - power, network, eSATA. −* Power on: switch, SSD enclosure, Eyesis4Pi. Boot takes about 1 min.+* Power on: switch, SSD enclosure, Eyesis4Pi393. Boot takes about 1 min. −* Setup PC IP+* Setup PC IP (can be done beforehand). −* Refresh GUI after camera boots.+* Refresh GUI after camera boots  + Note 1: If GUI is refreshed before subcamera has mounted SSD it will not display SSD free space. Refresh in a few moments or until SSD gets mounted.     <b> <b> Line 56: Line 57:     <font size="2"></font> '''''Note:''' Eyesis4Pi 393 default IP addresses: 192.168.0.161-163'' <br><br>   <font size="2"></font> '''''Note:''' Eyesis4Pi 393 default IP addresses: 192.168.0.161-163'' <br><br>    +  +== Tests ==  +  +...     <!-- <!-- Line 134: Line 139:  <br><br>   <br><br>    --> -->  +  == Setting recording parameters: camera settings == == Setting recording parameters: camera settings ==    Oleg

‎Power On

← Older revision Revision as of 01:06, 28 March 2017 (4 intermediate revisions by the same user not shown)Line 6: Line 6:    git clone https://git.elphel.com/Elphel/eyesis4pi-393-gui.git   git clone https://git.elphel.com/Elphel/eyesis4pi-393-gui.git    git pull (repeat any time to get the latest)   git pull (repeat any time to get the latest) −GitHub.com:+https://git.elphel.com: −  https://github.com/Elphel/eyesis4pi-393-gui+  https://git.elphel.com/Elphel/eyesis4pi-393-gui/tree/master     Follow the instructions in INSTALL.txt: Follow the instructions in INSTALL.txt: Line 33: Line 33:  == Power On == == Power On ==    −* Connect the camera's ethernet cables to the switch.+* Connect all cables - power, network, eSATA. −* Power on: switch, SSD enclosure, Eyesis4Pi. Boot takes about 1 min.+* Power on: switch, SSD enclosure, Eyesis4Pi393. Boot takes about 1 min.  +* Setup PC IP (can be done beforehand).  +* Refresh GUI after camera boots  + Note 1: If GUI is refreshed before subcamera has mounted SSD it will not display SSD free space. Refresh in a few moments or until SSD gets mounted.  +   <b> <b>    Important Notice: Use a fan to cool the camera's pole when shooting indoors.   Important Notice: Use a fan to cool the camera's pole when shooting indoors. Line 53: Line 57:     <font size="2"></font> '''''Note:''' Eyesis4Pi 393 default IP addresses: 192.168.0.161-163'' <br><br>   <font size="2"></font> '''''Note:''' Eyesis4Pi 393 default IP addresses: 192.168.0.161-163'' <br><br>    +  +== Tests ==  +  +...     <!-- <!-- Line 131: Line 139:  <br><br>   <br><br>    --> -->  +  == Setting recording parameters: camera settings == == Setting recording parameters: camera settings ==    Oleg

‎Power On

← Older revision Revision as of 01:06, 28 March 2017 (5 intermediate revisions by the same user not shown)Line 4: Line 4:  Terminal: Terminal:    cd <any-path>   cd <any-path> −  git clone https://github.com/Elphel/eyesis4pi-393-gui.git+  git clone https://git.elphel.com/Elphel/eyesis4pi-393-gui.git    git pull (repeat any time to get the latest)   git pull (repeat any time to get the latest) −GitHub.com:+https://git.elphel.com: −  https://github.com/Elphel/eyesis4pi-393-gui+  https://git.elphel.com/Elphel/eyesis4pi-393-gui/tree/master     Follow the instructions in INSTALL.txt: Follow the instructions in INSTALL.txt: Line 33: Line 33:  == Power On == == Power On ==    −* Connect the camera's ethernet cables to the switch.+* Connect all cables - power, network, eSATA. −* Power on: switch, SSD enclosure, Eyesis4Pi. Boot takes about 1 min.+* Power on: switch, SSD enclosure, Eyesis4Pi393. Boot takes about 1 min.  +* Setup PC IP (can be done beforehand).  +* Refresh GUI after camera boots  + Note 1: If GUI is refreshed before subcamera has mounted SSD it will not display SSD free space. Refresh in a few moments or until SSD gets mounted.  +   <b> <b>    Important Notice: Use a fan to cool the camera's pole when shooting indoors.   Important Notice: Use a fan to cool the camera's pole when shooting indoors. Line 53: Line 57:     <font size="2"></font> '''''Note:''' Eyesis4Pi 393 default IP addresses: 192.168.0.161-163'' <br><br>   <font size="2"></font> '''''Note:''' Eyesis4Pi 393 default IP addresses: 192.168.0.161-163'' <br><br>    +  +== Tests ==  +  +...     <!-- <!-- Line 131: Line 139:  <br><br>   <br><br>    --> -->  +  == Setting recording parameters: camera settings == == Setting recording parameters: camera settings ==    Oleg

Oleg Dzhimiev committed changes to the Elphel git project :
increased mem limit in php