Andrey Filippov (dccc15bf) at 02 Aug 08:47 fixed partition name when using LAN (not mounting partition locally)

Andrey Filippov (2a6df399) at 02 Aug 07:48 implemented LAN xfer with new version of imgsrv

Andrey Filippov (e0d4b063) at 02 Aug 05:12 Added sendvile64() limit of 620756992 (0x25000000) bytes failed and...

Andrey Filippov (b2a130ec) at 01 Aug 20:16 added imgsrv parameters: '-s /dev/sda2' for fast sending raw ssd da...

Andrey Filippov (6190b834) at 01 Aug 20:14 implemented ssd raw data sending

Andrey Filippov (3ff00693) at 27 Jul 12:01 implemented transfer over ssh (10x slower), restored input(), force...

Andrey Filippov (2c24e69b) at 27 Jul 05:20 restored two writer threads after finding/fixing unrelated bug

Olga Filippova (5e1a0164) at 26 Jul 19:50 input -> raw_input

Andrey Filippov (645729cc) at 26 Jul 07:25 bug fixing on chunk edges, added optional debug

Andrey Filippov (23dab5f8) at 24 Jul 15:53 Updated multi-scene Lazy Eye adjustment

Andrey Filippov (091f52ba) at 16 Jul 22:39 Fixing corrupted images after restart

Andrey Filippov (97346989) at 11 Jul 08:48 more debugging

Andrey Filippov (fe15d689) at 11 Jul 08:47 added single write thread option

Andrey Filippov (8040cfa1) at 10 Jul 16:50 naming bug

Andrey Filippov (d5901897) at 10 Jul 07:24 correctly processing split files, modified filenames for sorting

Added A-D description

← Older revision Revision as of 20:02, 9 July 2023 (One intermediate revision by the same user not shown)Line 19: Line 19:  Connector provides high-current (up to 0.5A) dc-coupled 5V output and optoisolated I/O. When optoisolated pair is used used as an input (common use), external signal is applied between XSYNC1 (+) and XSYNC2(-). When the pair is used as an output (less common), external 5V power source should be connected in series with the receiver and 103891, so that "+" will be applied to XSYNC2, and "-" - to XSYNC1 (opposite to the input mode). Details are available in the circuit diagram of the [[10389]] board. Connector provides high-current (up to 0.5A) dc-coupled 5V output and optoisolated I/O. When optoisolated pair is used used as an input (common use), external signal is applied between XSYNC1 (+) and XSYNC2(-). When the pair is used as an output (less common), external 5V power source should be connected in series with the receiver and 103891, so that "+" will be applied to XSYNC2, and "-" - to XSYNC1 (opposite to the input mode). Details are available in the circuit diagram of the [[10389]] board.    −Output synchronization can be just a pulse or carry additional timestamp data when used to synchronize multiple NC393 cameras. See [[Trigger_393]] for the settings.+Output synchronization can be just a pulse or carry additional timestamp data when used to synchronize multiple NC393 cameras. See [[Trigger_393]] for the settings. Pin A is the tip, B - next, then C and D is the closest to the connector housing.  {| class='wikitable' {| class='wikitable'  |+Connector pinout |+Connector pinout Line 28: Line 28:  |- |-  |XSYNC1 |XSYNC1 −|1+|1 (D)  |black |black  |optoisolated, "+" input with respect to XSYNC2 |optoisolated, "+" input with respect to XSYNC2  |- |-  |SYNC_DRV |SYNC_DRV −|2+|2 (A)  |red |red  |Sync output (DC-coupled), +5V pulses with respect to GND |Sync output (DC-coupled), +5V pulses with respect to GND  |- |-  |GND |GND −|3+|3 (B)  |white |white  |Output reference, connected to the camera system ground |Output reference, connected to the camera system ground  |- |-  |XSYNC2 |XSYNC2 −|4+|4 (C)  |green |green  |optoisolated, "-" input with respect to XSYNC1 |optoisolated, "-" input with respect to XSYNC1 Andrey.filippov

Andrey Filippov (67643efd) at 08 Jul 20:00 Start/restart behavior, more of relevant status output

Andrey Filippov (edaa3147) at 08 Jul 19:59 More status from camogm, timing of debug messages, start record beh...

Andrey Filippov (65d58636) at 08 Jul 19:58 modified "cmd=start" behavior

Andrey Filippov (2be574ef) at 08 Jul 05:49 Updating to match camogm behavior