Andrey Filippov committed changes to the Elphel git project :
corner fitting for OD=3mm tubes, modified

Andrey Filippov committed changes to the Elphel git project :
corner fitting for OD=3mm tubes

Created page with "Elphel NC393 series camera parts === 0393-97-01 - Flat head slotted screw, stainless steel 18-8, M1.6, l = 4mm === {{Cad4a|0393-97-01}} ----"

New page

[[Elphel_camera_parts_0393|Elphel NC393 series camera parts]]
=== 0393-97-01 - Flat head slotted screw, stainless steel 18-8, M1.6, l = 4mm ===
{{Cad4a|0393-97-01}}
---- Mikhail

← Older revision Revision as of 00:41, 12 May 2016 (One intermediate revision not shown)Line 15: Line 15: === [[Elphel_camera_parts_0393-83 | 0393-83 - Springs]] === === [[Elphel_camera_parts_0393-83 | 0393-83 - Springs]] === === [[Elphel_camera_parts_0393-90 | 0393-90 - Unthreaded spacers for M2]] === === [[Elphel_camera_parts_0393-90 | 0393-90 - Unthreaded spacers for M2]] === -=== [[Elphel_camera_parts_0393-93 | 0393-93 - nuts, M2.5]] ===+=== [[Elphel_camera_parts_0393-93 | 0393-93 - Nuts, M2.5]] ===  +=== [[Elphel_camera_parts_0393-97 | 0393-97 - Screws other than M2 and M2.5]] === === [[Elphel_camera_parts_0393-99 | 0393-99 - Screws, metric, M2]] === === [[Elphel_camera_parts_0393-99 | 0393-99 - Screws, metric, M2]] === Mikhail

Mikhail Karpenko committed changes to the Elphel git project :
Production

Mikhail Karpenko committed changes to the Elphel git project :
Add flat head slotted screw, M1.6, l=4mm

← Older revision Revision as of 23:34, 11 May 2016 Line 1: Line 1: [[Elphel_camera_parts_0393|Elphel NC393 series camera parts]] [[Elphel_camera_parts_0393|Elphel NC393 series camera parts]]  +  +All parts on this page were prepared for 3D printing. Some of them have support elements manually place in most critical parts, so you do not need to enable support elements in your slicer software. All those elements can be easily removed after printing. We used Ultimaker2 with 0.4 mm nozzle for 3D printing all of these parts and achieved good results with 0.7 mm wall thickness and 20% infill density. We posted some examples of 3D printed parts on [http://blog.elphel.com/2016/05/3d-print-your-camera-freedom/ our blog]  +  +One of the parts below, 0393-27-07, is a helper object. It was specifically created for cutting out of SFE mount place in custom designs.  +  +=== 0393-27-01f - C/CS SFE adapter ===  +{{Cad4c|0393-27-01f}}  +----  +=== 0393-27-02d - Adapter for camera body ===  +{{Cad4c|0393-27-02d}}  +----  +=== 0393-27-03c - Support frame adapter ===  +{{Cad4c|0393-27-03c}}  +----  +=== 0393-27-04 - Cable strain relief for 0393-27-03c ===  +{{Cad4c|0393-27-04}}  +----  +=== 0393-27-05 - Cable strain relief for 0393-27-01f ===  +{{Cad4c|0393-27-05}}  +----  +=== 0393-27-06 - Cable strain relief for 0393-27-03c ===  +{{Cad4c|0393-27-06}}  +----  +=== 0393-27-07 - SFE cutout part ===  +{{Cad4c|0393-27-07}}  +----  +=== 0393-27-08a - SFE adapter ===  +{{Cad4c|0393-27-08a}}  +----  +=== 0393-27-09 - SFE adapter ===  +{{Cad4c|0393-27-09}}  +----  +=== 0393-27-10 - Cable strain relief for 0393-27-03c or 0393-27-02d ===  +{{Cad4c|0393-27-10}}  +---- Mikhail

New page

<noinclude>
== Usage ==
Includes table with 5 files - JPEG, pdf, dxf and stp (external links) and stl and license
{{Cad4a|basename|changelog}}
</noinclude>
{|
|- valign="bottom"
|
{| border="0" cellpadding="3" style="border:1px solid lightgray;border-collapse:collapse;"
|-
| <span class="plainlinks">[http://community.elphel.com/files/production/{{{1}}}.jpeg http://community.elphel.com/files/production/{{{1}}}_resized.jpeg]</span>
|-
|
<span class="plainlinks" title="View model in the Web X3D Viewer">[http://community.elphel.com/x3d/index.html?nobuttons&animate&model=/x3d/x3d_model_files/x3d/{{{1}}}.x3d http://community.elphel.com/pictures/webx3dicon.png]</span><br/>
[http://community.elphel.com/files/production/{{{1}}}.stl 3d (stl)]&nbsp;&nbsp;
[http://community.elphel.com/files/production/{{{1}}}.stp.tar.gz 3d (step)]&nbsp;&nbsp;<br/>
[http://community.elphel.com/files/production/{{{1}}}.dxf.tar.gz 2d (dxf)]&nbsp;&nbsp;
[http://community.elphel.com/files/production/{{{1}}}.pdf 2d (pdf)]&nbsp;&nbsp;
|
|}
|
Copyright &copy; {{CURRENTYEAR}} Elphel Inc., Licensed under [http://ohwr.org/cernohl CERN OHL v.1.1], [http://www.gnu.org/copyleft/fdl.html GNU FDL v.1.3]
|-
|{{#if: {{{2|}}} | <span title="{{{2}}}" style="color:red;">Known problems</span> | &nbsp; }}
|
|}

<!--
{| border="0" cellpadding="2"
|-
|[[Image:{{{1}}}.jpeg|thumb|220px|
[http://community.elphel.com/files/production/{{{1}}}.stp.tar.gz 3d (step)]&nbsp;&nbsp;
[http://community.elphel.com/files/production/{{{1}}}.dxf.tar.gz 2d (dxf)] &nbsp;&nbsp;
[http://community.elphel.com/files/production/{{{1}}}.pdf 2d (pdf)] &nbsp;&nbsp;]]
|-
|}
--> Oleg

Created page with "Elphel NC393 series camera parts"

New page

[[Elphel_camera_parts_0393|Elphel NC393 series camera parts]] Mikhail

← Older revision Revision as of 22:23, 11 May 2016 Line 10: Line 10: === [[Elphel_camera_parts_0393-20 | 0393-20 - Custom mounting parts]] === === [[Elphel_camera_parts_0393-20 | 0393-20 - Custom mounting parts]] ===  +=== [[Elphel_camera_parts_0393-27 | 0393-27 - 3D printed parts]] === === [[Elphel_camera_parts_0393-30 | 0393-30 - Insulator tubing, spacers, tapes, pads]] === === [[Elphel_camera_parts_0393-30 | 0393-30 - Insulator tubing, spacers, tapes, pads]] === === [[Elphel_camera_parts_0393-63 | 0393-63 - Cured epoxy and other resins]] === === [[Elphel_camera_parts_0393-63 | 0393-63 - Cured epoxy and other resins]] === Mikhail

New page

[[Elphel_camera_parts_0393|Elphel NC393 series camera parts]]
=== 0393-93-01 - Brass knurled insert nut, M2.5 l=6mm ===
{{Cad4a|0393-93-01}}
---- Mikhail

Elphel NC393 series camera parts:

← Older revision Revision as of 22:18, 11 May 2016 Line 2: Line 2: === [[Elphel_camera_parts_0393-00 | 0393-00 - PCB assemblies]] === === [[Elphel_camera_parts_0393-00 | 0393-00 - PCB assemblies]] === === [[Elphel_camera_parts_0393-02 | 0393-02 - Storage options & other electronic assemblies]] === === [[Elphel_camera_parts_0393-02 | 0393-02 - Storage options & other electronic assemblies]] === -=== [[Elphel_camera_parts_0393-10 | 0393-10 - camera bodies]] ===+=== [[Elphel_camera_parts_0393-10 | 0393-10 - Camera bodies]] === -=== [[Elphel_camera_parts_0393-11 | 0393-11 - heat management parts]] ===+=== [[Elphel_camera_parts_0393-11 | 0393-11 - Heat management parts]] === -=== [[Elphel_camera_parts_0393-12 | 0393-12 - front ends]] ===+=== [[Elphel_camera_parts_0393-12 | 0393-12 - Front ends]] === === [[Elphel_camera_parts_0393-13 | 0393-13 - Camera back panels]] === === [[Elphel_camera_parts_0393-13 | 0393-13 - Camera back panels]] === -=== [[Elphel_camera_parts_0393-18 | 0393-18 - parts external other]] ===+=== [[Elphel_camera_parts_0393-18 | 0393-18 - Parts external other]] === -=== [[Elphel_camera_parts_0393-19 | 0393-19 - parts internal other]] ===+=== [[Elphel_camera_parts_0393-19 | 0393-19 - Parts internal other]] === -=== [[Elphel_camera_parts_0393-20 | 0393-20 - custom mounting parts]] ===+=== [[Elphel_camera_parts_0393-20 | 0393-20 - Custom mounting parts]] === -=== [[Elphel_camera_parts_0393-30 | 0393-30 - insulator tubing, spacers, tapes, pads]] ===+=== [[Elphel_camera_parts_0393-30 | 0393-30 - Insulator tubing, spacers, tapes, pads]] === === [[Elphel_camera_parts_0393-63 | 0393-63 - Cured epoxy and other resins]] === === [[Elphel_camera_parts_0393-63 | 0393-63 - Cured epoxy and other resins]] === -=== [[Elphel_camera_parts_0393-83 | 0393-83 - springs]] ===+=== [[Elphel_camera_parts_0393-83 | 0393-83 - Springs]] === === [[Elphel_camera_parts_0393-90 | 0393-90 - Unthreaded spacers for M2]] === === [[Elphel_camera_parts_0393-90 | 0393-90 - Unthreaded spacers for M2]] ===  +=== [[Elphel_camera_parts_0393-93 | 0393-93 - nuts, M2.5]] === === [[Elphel_camera_parts_0393-99 | 0393-99 - Screws, metric, M2]] === === [[Elphel_camera_parts_0393-99 | 0393-99 - Screws, metric, M2]] === Mikhail

0393-10-01 - NC393 camera body:

← Older revision Revision as of 22:16, 11 May 2016 Line 3: Line 3: ---- ---- === 0393-10-01 - NC393 camera body === === 0393-10-01 - NC393 camera body === -Machined from 0393-60-06 extrusion, Aluminum 6061T4, chromate conversion finish inside, anodized outside+Machined from 0393-60-06 extrusion, Aluminum 6061T6, chromate conversion finish inside, anodized outside {{Cad4a|0393-10-01}} {{Cad4a|0393-10-01}}  +----  +=== 0393-10-02 - NC393 camera frame ===  +Machined from 0393-60-06 extrusion, Aluminum 6061T6  +{{Cad4a|0393-10-02}} ---- ---- Mikhail

Mikhail Karpenko committed changes to the Elphel git project :
Production

Mikhail Karpenko committed changes to the Elphel git project :
Add 3D printed parts

Oleg Dzhimiev committed changes to the Elphel git project :
wpa_supplicant

Usage:

New page

<noinclude>
== Usage ==
Includes table with 5 files - JPEG, pdf, dxf, stp and stl
{{Cad5|basename}}
</noinclude>

{| border="0" cellpadding="2"
|-
|[[Image:{{{1}}}.jpeg|thumb|<span class="plainlinks" title="View model in the Web X3D Viewer">[http://community.elphel.com/x3d/index.html?nobuttons&animate&model=/files/x3d/{{{1}}}.x3d http://community.elphel.com/pictures/webx3dicon.png]</span><br/>[[Media:{{{1}}}.stl|3d (stl)]]&nbsp;&nbsp;[[Media:{{{1}}}.stp.tar.gz|3d (step)]]&nbsp;&nbsp;[[Media:{{{1}}}.dxf.tar.gz|2d (dxf)]]&nbsp;&nbsp;[[Media:{{{1}}}.pdf|2d (pdf)]]]] ||
|-
|} Oleg

← Older revision Revision as of 16:53, 11 May 2016 Line 1: Line 1: -[[Elphel_camera_parts]]+[[Elphel_camera_parts_0393|Elphel NC393 series camera parts]] == 0393-99 - Screws, metric, M2 == == 0393-99 - Screws, metric, M2 == === 0393-99-30 - Socket screw, stainless steel 18-8,  M2 l=7mm === === 0393-99-30 - Socket screw, stainless steel 18-8,  M2 l=7mm === Olga

← Older revision Revision as of 16:52, 11 May 2016 Line 1: Line 1: -[[Elphel_camera_parts]]+[[Elphel_camera_parts_0393|Elphel NC393 series camera parts]] == 0393-90 - Unthreaded spacers for M2 == == 0393-90 - Unthreaded spacers for M2 == === 0393-90-06 Spacer for M2, 2.1 mm high === === 0393-90-06 Spacer for M2, 2.1 mm high === Olga

← Older revision Revision as of 16:52, 11 May 2016 Line 1: Line 1: -[[Elphel_camera_parts]]+[[Elphel_camera_parts_0393|Elphel NC393 series camera parts]] == 0393-83 - springs == == 0393-83 - springs == === 0393-83-01 - Belleville disk spring, 0.125" ID, 0.250" OD, 0.013" Thick === === 0393-83-01 - Belleville disk spring, 0.125" ID, 0.250" OD, 0.013" Thick === Olga