AndreyFilippov committed changes to the Elphel git project :
made trigger-realted parameters to run through the sequencer too, continued

AndreyFilippov committed changes to the Elphel git project :
made trigger-realted parameters to run through the sequencer too, continued

AndreyFilippov committed changes to the Elphel git project :
made trigger-realted parameters to run through the sequencer too

AndreyFilippov committed changes to the Elphel git project :
made trigger-realted parameters to run through the sequencer too

AndreyFilippov committed changes to the Elphel git project :
correcting triggering - there was a false trigger when turning on extrenal trigger condition

AndreyFilippov committed changes to the Elphel git project :
correcting triggering - there was a false trigger when turning on extrenal trigger condition

Mikhail Karpenko committed changes to the Elphel git project :
Add recording speed measurement to AHCI driver

Mikhail Karpenko committed changes to the Elphel git project :
Add recording speed measurement to AHCI driver

Mikhail Karpenko committed changes to the Elphel git project :
Fix a bug with disappearing channel during recording

Mikhail Karpenko committed changes to the Elphel git project :
Fix a bug with disappearing channel during recording

Oleg Dzhimiev committed changes to the Elphel git project :
less comments

Oleg Dzhimiev committed changes to the Elphel git project :
less comments

← Older revision Revision as of 21:46, 21 November 2016 (One intermediate revision not shown)Line 2: Line 2: [[Image:103695.jpeg|frame|[[Media:103695a.pdf|103695A  Circuit Diagram, Parts List, PCB layout]]&nbsp;&nbsp;&nbsp;&nbsp; [[Media:103695a_gerber.tar.gz|103695A Gerber files]]]] [[Image:103695.jpeg|frame|[[Media:103695a.pdf|103695A  Circuit Diagram, Parts List, PCB layout]]&nbsp;&nbsp;&nbsp;&nbsp; [[Media:103695a_gerber.tar.gz|103695A Gerber files]]]] === Description === === Description === -103695 is an adapter board used with the [[10369]] interface board to connect [http://www.analog.com Analog Devices] inertial measurement units (IMU) such as ([http://www.analog.com/en/mems-sensors/imu/adis16375/products/product.html ADIS-16375], [http://www.analog.com/en/mems-sensors/inertial-sensors/adis16405/products/product.html ADIS-16405] and similar to the [[353 | Elphel Model 353 camera]].+103695 is an adapter board used to connect [http://www.analog.com/en/products/mems/inertial-measurement-units.html Analog Devices Inertial Measurement Units (IMUs)] to Elphel products. -Adapter uses two general purpose I/O of the camera FPGA, available on each of the [[10369]] USB/extension connectors J9..J11. The 103695 board provides 3.3V/5.0V power to the IMU (selectable by on-board resistors) and supports different speed SPI interface to the sensor unit. The device connector (J2) can accommodate a number of Analog Devices units, it should be possible to use the board with connector adapter with other SPI sensors.+Adapter uses two general purpose I/O of the camera FPGA available on each of the USB/extension connectors. The 103695 board provides 3.3V/5.0V power to the IMU (selectable by on-board resistors) and supports different speed SPI interface to the sensor unit. The device connector (J2) can accommodate a number of Analog Devices units, it should be possible to use the board with connector adapter with other SPI sensors. Camera interface to the 103695 board is implemented in the FPGA (starting with firmware revision 8.1.0). Up to 28 different 16-bit registers (plus 8 bytes of the timestamp with 1 microsecond resolution) are periodically addressed, read and stored in the  camera system memory over the DMA channel. The The logged register addresses are programmed at run time in the FPGA using the device driver. Camera interface to the 103695 board is implemented in the FPGA (starting with firmware revision 8.1.0). Up to 28 different 16-bit registers (plus 8 bytes of the timestamp with 1 microsecond resolution) are periodically addressed, read and stored in the  camera system memory over the DMA channel. The The logged register addresses are programmed at run time in the FPGA using the device driver.  +  +=== Compatibility ===  +====Elphel====  +{|  class="wikitable" style="background:#fcfcfc; "  border="1"  +! Camera series !! Interface board, connectors !! Support  +|-  +|align='center'|[[10393|10393]]  +|align='center'|[[10389]], J8,J9  +|align='center'|+  +|-  +|align='center'|[[353|10353]]  +|align='center'|[[10369]], J9..J11  +|align='center'|+  +|}  +  +====Analog Devices====  +{|  class="wikitable" style="background:#fcfcfc; "  border="1"  +! IMU !! Tested  +|-  +|align='center'|[http://www.analog.com/en/mems-sensors/imu/adis16375/products/product.html ADIS-16375]  +|align='center'|+  +|-  +|align='center'|[http://www.analog.com/en/mems-sensors/inertial-sensors/adis16405/products/product.html ADIS-16405]  +|align='center'|+  +|}  +  +<b>NOTE:</b> All IMUs have compatible interface and most likely will work with Elphel products. === Connectors === === Connectors === Oleg

103695 - IMU Adapter Board:

← Older revision Revision as of 21:21, 21 November 2016 Line 2: Line 2: [[Image:103695.jpeg|frame|[[Media:103695a.pdf|103695A  Circuit Diagram, Parts List, PCB layout]]&nbsp;&nbsp;&nbsp;&nbsp; [[Media:103695a_gerber.tar.gz|103695A Gerber files]]]] [[Image:103695.jpeg|frame|[[Media:103695a.pdf|103695A  Circuit Diagram, Parts List, PCB layout]]&nbsp;&nbsp;&nbsp;&nbsp; [[Media:103695a_gerber.tar.gz|103695A Gerber files]]]] === Description === === Description === -103695 is an adapter board used with the [[10369]] interface board to connect [http://www.analog.com Analog Devices] inertial measurement units (IMU) such as ([http://www.analog.com/en/mems-sensors/imu/adis16375/products/product.html ADIS-16375], [http://www.analog.com/en/mems-sensors/inertial-sensors/adis16405/products/product.html ADIS-16405] and similar to the [[353 | Elphel Model 353 camera]].+103695 is an adapter board used with the [[10389]]/[[10369]] interface boards to connect [http://www.analog.com Analog Devices] inertial measurement units (IMU) such as ([http://www.analog.com/en/mems-sensors/imu/adis16375/products/product.html ADIS-16375], [http://www.analog.com/en/mems-sensors/inertial-sensors/adis16405/products/product.html ADIS-16405] or similar (in short, all other are compatible but not tested) to the [[10393 | Elphel Model 393 camera]]/[[353 | Elphel Model 353 camera]]. Adapter uses two general purpose I/O of the camera FPGA, available on each of the [[10369]] USB/extension connectors J9..J11. The 103695 board provides 3.3V/5.0V power to the IMU (selectable by on-board resistors) and supports different speed SPI interface to the sensor unit. The device connector (J2) can accommodate a number of Analog Devices units, it should be possible to use the board with connector adapter with other SPI sensors. Adapter uses two general purpose I/O of the camera FPGA, available on each of the [[10369]] USB/extension connectors J9..J11. The 103695 board provides 3.3V/5.0V power to the IMU (selectable by on-board resistors) and supports different speed SPI interface to the sensor unit. The device connector (J2) can accommodate a number of Analog Devices units, it should be possible to use the board with connector adapter with other SPI sensors. Oleg

Oleg Dzhimiev committed changes to the Elphel git project :
optimized

Oleg Dzhimiev committed changes to the Elphel git project :
optimized

Oleg Dzhimiev committed changes to the Elphel git project :
1. a lib in DEPENDS still gets to rootfs 2. 'inherit target_scp' - works for any recipe

Oleg Dzhimiev committed changes to the Elphel git project :
1. a lib in DEPENDS still gets to rootfs 2. 'inherit target_scp' - works for any recipe

AndreyFilippov committed changes to the Elphel git project :
added libcurl to PHP. Requires libcurl in the camera, otherwise PHP won't start

AndreyFilippov committed changes to the Elphel git project :
added libcurl to PHP. Requires libcurl in the camera, otherwise PHP won't start