Oleg Dzhimiev committed changes to the Elphel git project :
14MPx phase adjustment testing

AndreyFilippov committed changes to the Elphel git project :
Merge branch 'master' of git@git.elphel.com:Elphel/x393.git

AndreyFilippov committed changes to the Elphel git project :
FPGA version 039300fd (hispi), changed lanes alignment report mode

‎103981

← Older revision Revision as of 17:08, 21 February 2018 Line 7: Line 7:  10398 board is a 18MPix sensor front end (SFE) designed to work with [[10393]] camera system board. It has the same physical dimensions and the same optical format (1/2.3") as a 5MPix SFE [[10338D]] and 14 MPix [[10398]](15mm x 28mm). 10398 board is a 18MPix sensor front end (SFE) designed to work with [[10393]] camera system board. It has the same physical dimensions and the same optical format (1/2.3") as a 5MPix SFE [[10338D]] and 14 MPix [[10398]](15mm x 28mm).    −The 18MPix (4912×3684, 1.25μm × 1.25 μm) BSI image sensor used is On Semiconductor (former Aptina) [http://www.onsemi.com/PowerSolutions/product.do?id=AR1820HS]. This sensor (and 103981 SFE) uses 4-lane HiSPi/MIPI serial interface running at 14 fps at full resolution (12bpp mode). 8-lane HiSPI mode is not supported. Other combinations of resolution/frame rate are possible.+The 18MPix (4912×3684, 1.25μm × 1.25 μm) BSI image sensor used is On Semiconductor (former Aptina) [http://www.onsemi.com/PowerSolutions/product.do?id=AR1820HS AR1820HS]. This sensor (and 103981 SFE) uses 4-lane HiSPi/MIPI serial interface running at 14 fps at full resolution (12bpp mode). 8-lane HiSPI mode is not supported. Other combinations of resolution/frame rate are possible.     Up to 4 103981 SFE can be directly connected to [[10393]] system board and run simultaneously at full speed (880M pixels/s combined). Up to 4 103981 SFE can be directly connected to [[10393]] system board and run simultaneously at full speed (880M pixels/s combined). Andrey.filippov

Oleg Dzhimiev committed changes to the Elphel git project :
-python3-opencv

Oleg Dzhimiev committed changes to the Elphel git project :
updated to 1.8

Oleg Dzhimiev committed changes to the Elphel git project :
Merge branch 'rocko' into rocko_ethereum

Oleg Dzhimiev committed changes to the Elphel git project :
added hargs-hispi to list

AndreyFilippov committed changes to the Elphel git project :
added skip lines, diff lanes phase adjust, bitstream fc

Oleg Dzhimiev committed changes to the Elphel git project :
added i2c slave addr updating before sensor detecting

Oleg Dzhimiev committed changes to the Elphel git project :
updated table for REGSXX

‎Cameras

← Older revision Revision as of 19:12, 14 February 2018 (One intermediate revision by the same user not shown)Line 23: Line 23:  |'''NC393-F-CS''' |'''NC393-F-CS'''  |'''NC393-DEV''' |'''NC393-DEV'''  +|'''MNC393-XCAM'''  |'''MNC393-H''' |'''MNC393-H'''    Line 29: Line 30:  |[[File:Nc393 small.jpeg|100px|link=http://www3.elphel.com/nc393-cs]] |[[File:Nc393 small.jpeg|100px|link=http://www3.elphel.com/nc393-cs]]  |[[File:Nc393-dev-sm.jpeg|150px]] |[[File:Nc393-dev-sm.jpeg|150px]]  +|[[File:mnc393-x_sm.jpeg|150px]]  |[[File:Nc-393-printed-H-.jpeg|150px|link=http://www3.elphel.com/mnc393-custom]] |[[File:Nc-393-printed-H-.jpeg|150px|link=http://www3.elphel.com/mnc393-custom]]    Line 37: Line 39:  |1x |1x  |1-4x |1-4x  +|4x  |4x |4x    Line 44: Line 47:  * GigE * GigE  * μSD slot * μSD slot −* 4x sensor ports, reconfigurable for general multi-purpose use+* 4x reconfigurable ports  | $1255 | $1255  | + | +  +| +  | +   | +    | + | + Line 60: Line 64:  | - | -  | + | +  +| +     |- valign='top' |- valign='top' Line 68: Line 73:  | + | +  | + | +  +| +     |- |- Line 126: Line 132:  |- |-  | - | -  +|-  +| -  +|}  +  +|    +{|  +| -  +|-  +| 4x  +|-  +| 1x  +|-  +| -  +|-  +| 1x  |- |-  | - | - Line 161: Line 182:     - -  +|    +-  +  ++  |   |    + + Line 210: Line 235:  |- |-  | 1-4x | 1-4x  +|-  +| -  +|}  +  +|    +{|  +|    +|-  +| 4x  |- |-  | - | - Line 226: Line 260:  |'''Camera calibration''' |'''Camera calibration'''  * XCAM * XCAM  +|    +$500  |   |    - - Line 231: Line 267:  - -  |   |   −-++  |   |    - - Line 239: Line 275:  |$2545 |$2545  |$1900-$3055 |$1900-$3055  +|$11990  |$3600 |$3600  |} |} Oleg

Oleg uploaded File:Mnc393-x sm.jpeg

New page

== Licensing ==
{{CC }} Oleg

‎Cameras

← Older revision Revision as of 18:56, 14 February 2018 (4 intermediate revisions by the same user not shown)Line 73: Line 73:  {| {|  |Sensor Front End |Sensor Front End  +|-  +|Calibrated Sensor Front End  |- |-  |Enclosure (aluminum, all parts) |Enclosure (aluminum, all parts)  |- |-  |Enclosure (aluminum, dev) |Enclosure (aluminum, dev)  +|-  +|Enclosure (xcam)  |- |-  |SFE Adapters (3D printed) |SFE Adapters (3D printed) Line 84: Line 88:  {| {|  | $90 | $90  +|-  +| $1700  |- |-  | $355 | $355  |- |-  | $65 | $65  +|-  +| $950  |- |-  | $345 | $345 Line 95: Line 103:  {| {|  | 1x | 1x  +|-  +| -  |- |-  | 1x | 1x  +|-  +| -  |- |-  | - | - Line 106: Line 118:  {| {|  | 1-4x | 1-4x  +|-  +| -  |- |-  | - | -  |- |-  | 1x | 1x  +|-  +| -  |- |-  | - | - Line 117: Line 133:  {| {|  | 4x | 4x  +|-  +| -  |- |-  | 1x | 1x  +|-  +| -  |- |-  | - | - Line 127: Line 147:  |- |-  |'''M.2 SSD''' |'''M.2 SSD''' −* SanDisk SD8SMAT, 128GB+* Transcend MTS600, 256GB  +* Transcend MTS600, 512GB  |   |   −$95+$200  +   +$400  |   |    +-  +  - -  |   |    +-  +  - -  |   |    + +     +-  |- |-  |'''Lenses''' |'''Lenses''' Line 194: Line 222:  | - | -  |} |}  +  +|-  +|'''Camera calibration'''  +* XCAM  +|    +-  +|    +-  +|    +-  +|    +-     |- style='border-top:solid 3px black;' |- style='border-top:solid 3px black;' Line 199: Line 239:  |$2545 |$2545  |$1900-$3055 |$1900-$3055 −|$3495+|$3600  |} |}    Oleg

Oleg Dzhimiev committed changes to the Elphel git project :
initial pgm_detect and pgm_init for mt9f002

‎Supported Image Sensors

← Older revision Revision as of 02:13, 13 February 2018 (2 intermediate revisions by the same user not shown)Line 17: Line 17:  * [[10398]]:  [http://www.onsemi.com/PowerSolutions/product.do?id=MT9F002 MT9F002] -  14MPix 1/2.3" CMOS * [[10398]]:  [http://www.onsemi.com/PowerSolutions/product.do?id=MT9F002 MT9F002] -  14MPix 1/2.3" CMOS  * [[103981]]: [http://www.onsemi.com/PowerSolutions/product.do?id=AR1820HS AR1820HS] - 18MPix 1/2.3" CMOS BSI ('' not yet manufactured'') * [[103981]]: [http://www.onsemi.com/PowerSolutions/product.do?id=AR1820HS AR1820HS] - 18MPix 1/2.3" CMOS BSI ('' not yet manufactured'')  +* [[10359]]:  3:1 Sensor multiplexer with memory, connects 3 of [[10338D]] SFE on each port, 12 sensors total     ====Memory and Storage==== ====Memory and Storage==== Line 34: Line 35:  ** M.2 SATA port ** M.2 SATA port  ** External synchronization (master or slave): ** External synchronization (master or slave): −*** 2.5mm audio+*** 2.5mm audio connector/cable (4-conductor)  *** 4-conductor flex cable *** 4-conductor flex cable −** 2x 10-conductor flex cable ports+** 2x 10-conductor flex cable ports (USB, I²C, +5.0V, +3.3V, 2 × FPGA GPIO signals)  *** carry 3.3VDC, 5VDC, USB, I²C and GPIO *** carry 3.3VDC, 5VDC, USB, I²C and GPIO  *** supports other extension boards ([[103695|IMU]], [[103696|GPS]]) *** supports other extension boards ([[103695|IMU]], [[103696|GPS]]) Andrey.filippov

← Older revision Revision as of 02:09, 13 February 2018 Line 7: Line 7:  10398 board is a 18MPix sensor front end (SFE) designed to work with [[10393]] camera system board. It has the same physical dimensions and the same optical format (1/2.3") as a 5MPix SFE [[10338D]] and 14 MPix [[10398]](15mm x 28mm). 10398 board is a 18MPix sensor front end (SFE) designed to work with [[10393]] camera system board. It has the same physical dimensions and the same optical format (1/2.3") as a 5MPix SFE [[10338D]] and 14 MPix [[10398]](15mm x 28mm).    −The 18MPix (4912×3684, 1.25μm x1.25 μm) BSI image sensor used is On Semiconductor (former Aptina) [http://www.onsemi.com/PowerSolutions/product.do?id=AR1820HS]. This sensor (and 103981 SFE) uses 4-lane HiSPi/MIPI serial interface running at 14 fps at full resolution (12bpp mode). 8-lane HiSPI mode is not supported. Other combinations of resolution/frame rate are possible.+The 18MPix (4912×3684, 1.25μm × 1.25 μm) BSI image sensor used is On Semiconductor (former Aptina) [http://www.onsemi.com/PowerSolutions/product.do?id=AR1820HS]. This sensor (and 103981 SFE) uses 4-lane HiSPi/MIPI serial interface running at 14 fps at full resolution (12bpp mode). 8-lane HiSPI mode is not supported. Other combinations of resolution/frame rate are possible.     Up to 4 103981 SFE can be directly connected to [[10393]] system board and run simultaneously at full speed (880M pixels/s combined). Up to 4 103981 SFE can be directly connected to [[10393]] system board and run simultaneously at full speed (880M pixels/s combined). Andrey.filippov

‎Supported Image Sensors

← Older revision Revision as of 02:03, 13 February 2018 Line 14: Line 14:  ** 800MHz ** 800MHz  ====Supported Image Sensors==== ====Supported Image Sensors==== −* [http://www.onsemi.com/PowerSolutions/product.do?id=MT9P006 MT9P006] - 5MPix 1/2.5" CMOS, see [[Mt9p006_specs|fps-resolution table]]+* [[10338D]]: [http://www.onsemi.com/PowerSolutions/product.do?id=MT9P006 MT9P006] -   5MPix 1/2.5" CMOS, see [[Mt9p006_specs|fps-resolution table]] −* [http://www.onsemi.com/PowerSolutions/product.do?id=MT9F002 MT9F002] - 14MPix 1/2.3" CMOS+* [[10398]]:  [http://www.onsemi.com/PowerSolutions/product.do?id=MT9F002 MT9F002] -   14MPix 1/2.3" CMOS  +* [[103981]]: [http://www.onsemi.com/PowerSolutions/product.do?id=AR1820HS AR1820HS] - 18MPix 1/2.3" CMOS BSI ('' not yet manufactured'')     ====Memory and Storage==== ====Memory and Storage==== Andrey.filippov

← Older revision Revision as of 01:42, 13 February 2018 (One intermediate revision by the same user not shown)Line 7: Line 7:  10398 board is a 18MPix sensor front end (SFE) designed to work with [[10393]] camera system board. It has the same physical dimensions and the same optical format (1/2.3") as a 5MPix SFE [[10338D]] and 14 MPix [[10398]](15mm x 28mm). 10398 board is a 18MPix sensor front end (SFE) designed to work with [[10393]] camera system board. It has the same physical dimensions and the same optical format (1/2.3") as a 5MPix SFE [[10338D]] and 14 MPix [[10398]](15mm x 28mm).    −The 18MPix (4912×3684, 1.25μm x1.25 μm) BSI image sensor used is On Semiconductor (former Aptina) [http://www.onsemi.com/PowerSolutions/product.do?id=AR1820HS]. This sensor (and 103981 SFE) uses 4-lane HiSPi/MIPI serial interface running at 14 fps at full resolution (12bpp mode). 8-lane HiSPI mode is not supported, mode Other combinations of resolution/frame rate are possible.+The 18MPix (4912×3684, 1.25μm x1.25 μm) BSI image sensor used is On Semiconductor (former Aptina) [http://www.onsemi.com/PowerSolutions/product.do?id=AR1820HS]. This sensor (and 103981 SFE) uses 4-lane HiSPi/MIPI serial interface running at 14 fps at full resolution (12bpp mode). 8-lane HiSPI mode is not supported. Other combinations of resolution/frame rate are possible.     Up to 4 103981 SFE can be directly connected to [[10393]] system board and run simultaneously at full speed (880M pixels/s combined). Up to 4 103981 SFE can be directly connected to [[10393]] system board and run simultaneously at full speed (880M pixels/s combined).    −103981 SFE uses the same 30-pin flex cable connector for control (I²C, extra GPIO), differential data output (4-lane HiSPi+clock) and 3.3V power (additional 2.8V analog and 1.8V digital are generated on board). Short connections can use general purpose flex jumpers (30 conductors, 0.5mm pitch) or Elphel flex cables manufactured for the parallel interface sensors, longer connections require controlled-impedance flex cables with 100Ω differential lines.+103981 SFE uses the same 30-pin flex cable connector for control (I²C, extra GPIO), differential data output (4-lane HiSPi+clock) and 3.3V power (additional 2.8V analog, 1.8V digital, and 1.2V digital are generated on board). Short connections can use general purpose flex jumpers (30 conductors, 0.5mm pitch) or Elphel flex cables manufactured for the parallel interface sensors, longer connections require controlled-impedance flex cables with 100Ω differential lines.     [[Media:103981_sch.pdf|103981 Circuit Diagram]] <br/> [[Media:103981_gerber.tar.gz|103981 Gerber files]] <br/>[[Media:103981_assy.tar.gz|103981 placement files]] [[Media:103981_sch.pdf|103981 Circuit Diagram]] <br/> [[Media:103981_gerber.tar.gz|103981 Gerber files]] <br/>[[Media:103981_assy.tar.gz|103981 placement files]] Andrey.filippov

Created page with "==103981== ''This board is not manufactured yet, images will be updated'' thumb|374px|10398 board, top view (will be replaced with 103981) Image:103..."

New page

==103981==
''This board is not manufactured yet, images will be updated''

[[Image:10398_top.png|thumb|374px|10398 board, top view (will be replaced with 103981)]]
[[Image:10398_bottom.png|thumb|374px|10398 board, bottom view (will be replaced with 103981)]]

10398 board is a 18MPix sensor front end (SFE) designed to work with [[10393]] camera system board. It has the same physical dimensions and the same optical format (1/2.3") as a 5MPix SFE [[10338D]] and 14 MPix [[10398]](15mm x 28mm).

The 18MPix (4912×3684, 1.25μm x1.25 μm) BSI image sensor used is On Semiconductor (former Aptina) [http://www.onsemi.com/PowerSolutions/product.do?id=AR1820HS]. This sensor (and 103981 SFE) uses 4-lane HiSPi/MIPI serial interface running at 14 fps at full resolution (12bpp mode). 8-lane HiSPI mode is not supported, mode Other combinations of resolution/frame rate are possible.

Up to 4 103981 SFE can be directly connected to [[10393]] system board and run simultaneously at full speed (880M pixels/s combined).

103981 SFE uses the same 30-pin flex cable connector for control (I²C, extra GPIO), differential data output (4-lane HiSPi+clock) and 3.3V power (additional 2.8V analog and 1.8V digital are generated on board). Short connections can use general purpose flex jumpers (30 conductors, 0.5mm pitch) or Elphel flex cables manufactured for the parallel interface sensors, longer connections require controlled-impedance flex cables with 100Ω differential lines.

[[Media:103981_sch.pdf|103981 Circuit Diagram]] <br/> [[Media:103981_gerber.tar.gz|103981 Gerber files]] <br/>[[Media:103981_assy.tar.gz|103981 placement files]] Andrey.filippov