RS-232 adapter/cable is used with NC353L-IO cameras (those that include 10369 extension board) to connect it to the computer serial port. This port outputs all the boot and debug messages and provides system console that can be used for software development - this console allows to control the camera even if the network is misconfigured. This kit consists of 2 parts 0353-01-04 - DB9 to modular adapter with custom wiring and a 0353-01-05 - 6-wire modular cable with crossover wiring (6-wire modular telephone cable)

45° adapter accessory part can be used as spacer between the sensor frontend and computer part of the camera.
The photograph shows the completely assembled camera with 45° adapter.

0353-12-11 - Elbow 45 deg. for the sensor front end







90° adapter accessory part can be used as spacer between the sensor frontend and computer part of the camera.
The photograph shows the completely assembled camera with 90° adapter installed.

0353-12-14 - Elbow 90 deg. for the sensor front end







A 135° adapter can be created by combining 45° and 90° adapter.
Using a very wide angle lens or fisheye this allows easy monitoring of a complete room when installed in a ceiling corner.