Model 353 turn-key cameras
|
NC353L is a network camera series 353 capable of streaming high resolution video. It includes:
- 10353 system board with
- 200MHz 32-bit Axis ETRAX FS CPU
- 128 MB SDRAM (64MB system +64MB Video)
- 128 MB NAND flash memory
- Xilinx Spartan®3e 1200K gate reconfigurable FPGA.
- IEEE802.3af Power over Ethernet (PoE), 12/24VDC optional
- 10338 sensor board with color 5MPix sensor (monochrome optional)
- Camera physical dimensions & weight without lens and C/CS mount adapter
- Weight: 215g
- Width: 44mm
- Height: 45mm
- Length: 118mm
|
|
NC353L-369 is a model 353 series camera capable of recording video and images to the external SATA mass storage device or internal CF cards. Serial port provides access to the root console that simplifies firmware development.
- 10353 system board with
- 200MHz 32-bit Axis ETRAX FS CPU
- 128 MB SDRAM (64MB system +64MB Video)
- 128 MB NAND flash memory
- Xilinx Spartan®3e 1200K gate reconfigurable FPGA.
- IEEE802.3af Power over Ethernet (PoE), 12/24VDC optional
- 10338 sensor board with color 5MPix sensor (monochrome optional)
- 10369 I/O board with
- SATA port for external disk drives
- Internal IDE port
- RS-232 port
- Opto-isolated I/O port for synchronizing the camera or synchronizing together multiple cameras (modular RJ14 external connector)
- Opto-isolated I/O port for synchronizing multiple camera modules in the same enclosure (flex cable connectors)
- Digital thermometer with internal ("system") and external thermal sensor (emitter-base junction of PNP or NPN transistor)
- Fan driver, controlled by the digital thermometer with programmable on/off temperature
- Clock/calendar with the super-capacitor backup power
- EEPROM for the board identification and configuration
- 103691riser/adapter board for Compact Flash
- Compact Flash card (options available)
- RS-232 adapter/cable
- Camera physical dimensions & weight without lens and C/CS mount adapter
- Weight: 230g
- Width: 44mm
- Height: 45mm
- Length: 118mm
|
|
NC353L-369-GEO is a model 353 series camera for making geotagged video and images. It includes:
- 10353 system board with
- 200MHz 32-bit Axis ETRAX FS CPU
- 128 MB SDRAM (64MB system +64MB Video)
- 128 MB NAND flash memory
- Xilinx Spartan®3e 1200K gate reconfigurable FPGA.
- IEEE802.3af Power over Ethernet (PoE), 12/24VDC optional
- 10338 sensor board with color 5MPix sensor (monochrome optional)
- 10369 I/O board with
- SATA port for external disk drives
- Internal IDE port
- RS-232 port
- Opto-isolated I/O port for synchronizing the camera or synchronizing together multiple cameras (modular RJ14 external connector)
- Opto-isolated I/O port for synchronizing multiple camera modules in the same enclosure (flex cable connectors)
- Digital thermometer with internal ("system") and external thermal sensor (emitter-base junction of PNP or NPN transistor)
- Fan driver, controlled by the digital thermometer with programmable on/off temperature
- Clock/calendar with the super-capacitor backup power
- EEPROM for the board identification and configuration
- 103691riser/adapter board for Compact Flash
- Compact Flash card (options available)
- Ocean Server OS5000-US Digital compass (inside the camera)
- Garmin GPS 18 USB GPS receiver (external)
- RS-232 adapter/cable
- Camera physical dimensions & weight without lens, C/CS mount adapter and GPS receiver
- Weight: 235g
- Width: 44mm
- Height: 45mm
- Length: 118mm
|
|
NC353L-369-HDD is a model 353 series camera with attached 1.8" for direct recording images/video. It includes:
- 10353 system board with
- 200MHz 32-bit Axis ETRAX FS CPU
- 128 MB SDRAM (64MB system +64MB Video)
- 128 MB NAND flash memory
- Xilinx Spartan®3e 1200K gate reconfigurable FPGA.
- IEEE802.3af Power over Ethernet (PoE), 12/24VDC optional
- 10338 sensor board with color 5MPix sensor (monochrome optional)
- 10369 I/O board with
- SATA port for external disk drives
- Internal IDE port
- RS-232 port
- Opto-isolated I/O port for synchronizing the camera or synchronizing together multiple cameras (modular RJ14 external connector)
- Opto-isolated I/O port for synchronizing multiple camera modules in the same enclosure (flex cable connectors)
- Digital thermometer with internal ("system") and external thermal sensor (emitter-base junction of PNP or NPN transistor)
- Fan driver, controlled by the digital thermometer with programmable on/off temperature
- Clock/calendar with the super-capacitor backup power
- EEPROM for the board identification and configuration
- 103692 riser/adapter board for ZIF-type 1.8" HDD
- 1.8" 60GB ZIF-type HDD (options available)
- RS-232 adapter/cable
|
|
Stereo/3D camera setup utilises 2 sensors front ends and the 10359 multiplexer board to record synced stereo video.
Only a single 10353 system board is required.
- 10353 system board with
- 200MHz 32-bit Axis ETRAX FS CPU
- 128 MB SDRAM (64MB system +64MB Video)
- 128 MB NAND flash memory
- Xilinx Spartan®3e 1200K gate reconfigurable FPGA.
- IEEE802.3af Power over Ethernet (PoE), 12/24VDC optional
- 2x 10338 sensor boards with color 5MPix sensor (monochrome optional)
- 10359 multi-function/multiplexer board to connect both sensor boards
- 0353-10-11 stereo crossbar, stereo base=248.5mm, l=300mm
- optional 10369 I/O board with
- SATA port for external disk drives
- Internal IDE port
- RS-232 port
- Opto-isolated I/O port for synchronizing the camera or synchronizing together multiple cameras (modular RJ14 external connector)
- Opto-isolated I/O port for synchronizing multiple camera modules in the same enclosure (flex cable connectors)
- Digital thermometer with internal ("system") and external thermal sensor (emitter-base junction of PNP or NPN transistor)
- Fan driver, controlled by the digital thermometer with programmable on/off temperature
- Clock/calendar with the super-capacitor backup power
- EEPROM for the board identification and configuration
|
|
繁體中文
English
Français
Русский
