Difference between revisions of "10349"

From ElphelWiki
Jump to: navigation, search
Dimon (talk | contribs)
(Add new bridge ARC-770)
← Older edit
Dimon (talk | contribs)
(add link to menefacturer)
Newer edit →
Line 34: Line 34:
 
IDE-SATA bridges:
 
IDE-SATA bridges:
  
  * JMicron JM20330 (send email)
+
  * JMicron [[http://www.jmicron.com.tw/JM20330.html JM20330]] (send email)
 
  * Marvell 88i8030, 88SA8040 (need sign NDA, sucks)
 
  * Marvell 88i8030, 88SA8040 (need sign NDA, sucks)
  * Silicon Image SiI3611 (Available only through your local sales contact. send email)
+
  * Silicon Image [[http://www.siliconimage.com/products/product.aspx?id=30 SiI3611]] (Available only through your local sales contact. send email)
  * Atmel AT78C5010 (Available only through your local sales contact. send email)
+
  * Atmel [[http://www.atmel.com/dyn/products/product_card.asp?family_id=677&family_name=Data+Storage&part_id=3456 AT78C5010]] (Available only through your local sales contact. send email)
 
  * ACARD [[http://www.acard.com/english/fb01-product.jsp?prod_no=ARC-770&type1_title=Storage%20IC&type1_idno=1&idno_no=60 ARC-770]]
 
  * ACARD [[http://www.acard.com/english/fb01-product.jsp?prod_no=ARC-770&type1_title=Storage%20IC&type1_idno=1&idno_no=60 ARC-770]]
  
 
Now I can`t found any datasheets for this. It`s a big secret of a company :(
 
Now I can`t found any datasheets for this. It`s a big secret of a company :(

Revision as of 13:44, 2 August 2007

Russia page 10349.Ru

Interface board.

  • serial port
  • 4 ports USB hub with 3 internal, 1 external USB ports
  • IDE port for the 1.8" hard drive with ZIF Flat cable
  • 2 socket for external usermade board
  • some points for soldering wires directly to board (from external board to 10349 for example), easy hardware developing.

Power description

It has DC-DC converter 3.3V->5V 1.5A. Each USB port has current limit to 300mA. Each port is overcurrent protected via USB power distributed systems. Use both IDE hard drive with USB devices can be overload Power over Ethernet equipment. Use external additional power injector.

Kit for Developers

  • for serial cable - connector A3B-6D-2C (Digi-Key) - 1 + half of AE9873-ND (Digi-Key) - 1
  • for internal USB sockets - AE10179-ND (Digi-Key) - 1
  • for additional boards connectors 3M5311-ND (thru-hole 2mm, Digi-Key) - 2
  • or for additional boards connectors 3M5309CT-ND (SMD, Digi-Key) - 2
  • blank PCB board V1255-ND (Digi-Key) - 1

Next revision

In new revision of this board we want use much more IDE interfaces.

* IDE port for a 2.5" hard drive
* IDE port for CompactFlash card
* IDE port a 1.8" hard drive with ZIF Flat cable
* SATA port

For make SATA port we can use IDE<->SATA bridge or soft IP core in a FPGA.

IDE-SATA bridges:

* JMicron [JM20330] (send email)
* Marvell 88i8030, 88SA8040 (need sign NDA, sucks)
* Silicon Image [SiI3611] (Available only through your local sales contact. send email)
* Atmel [AT78C5010] (Available only through your local sales contact. send email)
* ACARD [ARC-770]

Now I can`t found any datasheets for this. It`s a big secret of a company :(