Hammer Setup
|
Hammer camera setup (MNC354-2B, MNC354-2B-HDD) utilises 2 sensors front ends and the 10359 multiplexer board to record synced stereo video.
Only a single 10353 system board is required.
- 10353 system board with
- 200MHz 32-bit Axis ETRAX FS CPU
- 128 MB SDRAM (64MB system +64MB Video)
- 128 MB NAND flash memory
- Xilinx Spartan®3e 1200K gate reconfigurable FPGA.
- 48V DC supply with partial IEEE802.3af compatibility (full PoE requires camera modification), 12-36V DC optional
- 2x 10338 sensor boards with color 5MPix sensor (monochrome optional)
- 10359 multi-function/multiplexer board to connect both sensor boards
- optional internal 120GB 1.8" HDD
- optional 10369 I/O board with
- SATA port for external disk drives
- Internal IDE port
- RS-232 port
- Opto-isolated I/O port for synchronizing the camera or synchronizing together multiple cameras (modular RJ14 external connector)
- Opto-isolated I/O port for synchronizing multiple camera modules in the same enclosure (flex cable connectors)
- Digital thermometer with internal ("system") and external thermal sensor (emitter-base junction of PNP or NPN transistor)
- Fan driver, controlled by the digital thermometer with programmable on/off temperature
- Clock/calendar with the super-capacitor backup power
- EEPROM for the board identification and configuration
|
|
Price list
|
|
